Customs – 50/2017 – Dated:- 30-6-2017 – GOVERNMENT OF INDIA MINISTRY OF FINANCE (DEPARTMENT OF REVENUE) Notification No. 50 /2017 -Customs New Delhi, the 30th June, 2017 G.S.R. 785 (E).- In exercise of the powers conferred by sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962) and sub-section (12) of section 3, of Customs Tariff Act, 1975 (51 of 1975), and in supersession of the notification of the Government of India in the Ministry of Finance (Department of Revenue), No. 12/2012 -Customs, dated the 17th March, 2017 published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i), vide number G.S.R. 185 (E) dated the [17th March, 2012], except as respects things done or omitted to be done before such supersession, the Central Government, on being satisfied that it is necessary in the public interest so to do, hereby exempts the goods of the description specified in column (3) of the Table below or column (3) of the said Table read with the relevan
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
Table S.No. Chapter or Heading or sub-heading or tariff item Description of goods Standard rate Integrated Goods and Services Tax Condition No. (1) (2) (3) (4) (5) (6) 1. 1 Animals and birds imported by zoo Nil 2. 1 Cows, heifers, bulls, goats, sheep, pigs, angora rabbits, ducklings and pureline poultry stock 5% 3. 1 Grandparent poultry stock and donkey stallions 25% 84[***] 85[***] 86[***] 87[***] 100[7A. 0404 10 10 Whey, concentrated, evaporated or condensed, liquid or semi-solid 30% 7B. 0404 90 00 All goods 30% ] 8. 0405 Butter, ghee and butter oil 30% 9. 0406 90 00 All goods 30% 10. 5 Pancreas 5% 11. 0508 00 Conch shell 5% 12. 0508 00 10 All goods Nil 13. 0511 91 Artemia cyst, including wet artemia Cyst 5% 14. 0511 99 11 Artemia 5% 114[14A 0511 99 11 Artemia originating in the United States of America 15% ] 15. 05 or any other Chapter The following goods, namely:- (1) Frozen semen; (2) Frozen semen equipment, namely:- (a) flasks, refrigerators, vessels, jars or dewars, a
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
her. 116[24A 08021100 All goods ₹ 35 per kg/ 24B 0802 12 00 All goods ₹ 100 per kg/] 101[***] 26. 0802 21 00, 0802 22 00 All goods 10% 117[26A 0802 3100 All goods 100% ] 27. 0802 51 00, 0802 52 00 All goods 10% 28. 0802 61 00, 0802 62 00, 0802 70 00 or 08029000 All goods (excluding areca nuts also known as betel nuts) 30% 29. 0804 10 20, 0804 10 30 All goods 20% 30. 0805 10 00, 0805 50 00, 0806 10 00, 0808 30 00 or 0808 40 00 All goods 30% 31. 0806 20 All goods 100% 32. 0806 20 10 Dark seedless raisin 30% 118[32A 0808 10 00 All goods 50% ] 33. 0810 60 00 or 0810 90 All goods, other than black, white or red currants and gooseberries. 15% 34. 0904 11 10 Long pepper (Piper longum) 30% 35. 0907 All goods 35% 36. 1001 All goods other than meslin or wheat 50% 37. 1001 19 00 or 1001 99 10 Wheat 102[30%] 38. 1001 Meslin Nil 39. 1005 10 00, 1007 or 1008 21, 1008 29 All goods 50% 40. 1005 90 00 Goods upto an aggregate of five lakh metric tonnes of total imports of such
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
11 10 85% 57 15 I. The following goods, other than of edible grade, namely:- (A) Crude palm stearin having Free Fatty Acid (FFA) 20 percent or more and falling under heading 1511, imported for manufacture of soaps, fatty acids and fatty alcohols by a manufacturer having plant for splitting up of such oils into fatty acids and glycerols Nil – 9 (B) All goods (except crude palm oil and crude palm stearin) having Free Fatty Acid (FFA) 20 percent or more and falling under heading 1507, 1508, 1509, 1510, 1511, 1512, 1513, 1514 or 1515, imported for the manufacture of soaps, industrial fatty acids and fatty alcohol by a manufacturer having plant for splitting up of such oils into fatty acids and glycerols. Nil – 9 (C) All goods (except crude palm oil), having Free Fatty Acid (FFA) 20 percent or more, and falling under heading 1507, 1508, 1509, 1510, 1511, 1512, 1513, 1514 or 1515 for the manufacture of soaps, industrial fatty acids, and fatty alcohol. Nil – 9 (D) All goods (except crude pal
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
kg., in loose or bulk form 92[44%] Explanation.-For the purposes of this entry, Crude palm oil means fixed vegetable oils, fluid or solid, obtained by pressure, if they have undergone no processing other than decantation, centrifugation or filtration, provided that, in order to separate the oils from solid particles only mechanical force, such as gravity, pressure or centrifugal force, has been employed, excluding any absorption filtering process, fractionalization or any other physical or chemical process. If obtained by extraction an oil shall continue to be considered as crude , provided it has undergone no change in colour, odour or taste when compared with corresponding oil obtained by pressure 58. 15 Refined vegetable oils of edible grade, in loose or bulk form (other than those falling under heading 1511) 85% 59 15 Vegetable oils of edible grade, in loose or bulk form (other than those specified against S. No. 58 and those falling under heading 1511), imported for the manufact
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
aggregate of one lakh and fifty thousand metric tonnes of total imports of such goods in a financial year. 50% – 1 69. 1512 11 All goods other than those specified against S. No. 68 75% 70. 1512 11 10 All goods 108[35%] 71. 1512 19 10 All goods 109[45%] 72. 1514 19 or 1514 99 Refined rape, colza or mustard oil upto an aggregate of one lakh and fifty thousand metric tonnes of total imports of such goods in a financial year. 45% – 1 73. 1514 11 or 1514 91 All goods, edible grade 110[35%] 74. 1514 19 or 1514 99 All goods, edible grade 111[45%] 75. 1516 10 All goods 30% 76. 1516 20 All goods 80% 77. 1516 20 All goods of edible grade 112[45%] 78. 1517 or 1518 All goods of edible grade 80% 79. 1517 10 21, 1517 90 10, 1518 00 11, 1518 00 21 or 1518 00 31 All goods of edible grade 113[45%] 80. 1517 or 1518 All goods other than edible grade 30% 81. 1520 00 00 Crude glycerin 7.5% 82. 1520 00 00 Crude glycerin for use in the manufacture of soaps Nil – 9 83. 1520 00 00 All goods 20% 7
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
in a proportion by weight of 5% or more but less than10%; or (ii) flour, meal, starch or malt extract containing cocoa calculated on a totally defatted basis, in a proportion by weight of 40% or more but less than 50%. 95. 1901 10 Preparations for infant use, put up for retail sale. 30% 96. 1903 00 00 All goods 30% 97. 1905 31 00 or 1905 32 All goods 30% 98. 2004 10 00 All goods 30% 99. 2008 11 00 Peanut Butter 7.5% 100. 2008 93 00, 50[***] 2202 90 Cranberry products 10% 51[***] 103[***] 103. 2106 90 All goods (excluding compound alcoholic preparations of a kind used for the manufacture of beverages, of an alcoholic strength by volume exceeding 0.5% by volume, determined at a temperature of 20 degrees centigrade) 52[50%] 104. Any Chapter The goods specified in List 1 used in the processing of sea-food. Nil – 10 105. 22 Wine, for use as sacramental wine 30% – 11 106. 2207 20 00 All goods 5% 107. 2207 20 00 Denatured ethyl alcohol (ethanol) for use in manufacture of excisable go
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
ed in the Public Notice No. 1 (RE-88)/1997-2002, dated the 24th June, 1998 (as amended from time to time) of the Government of India, in the Ministry of Commerce and Industry. 120. 25 (except 2515, 2516, 2523, 2524) All goods 5% 121. 2503 00 Crude or unrefined sulphur 2.5% 122. 2505 10 11, 2505 10 12, 2505 10 19 Silica Sands 2.5% 123. 2510 Rock phosphate 2.5% 124. 2515 11 00, All goods, other than,- 10% 2515 12 10, (i) Rough Marble and Travertine blocks; 2515 12 20, 2515 12 90, 2516 11 00, 2516 12 00 (ii) Marble slabs 125.2 2515 12 20 Marble slabs 20% 126. 2518 Dolomite for metallurgical use conforming to IS:10346-2004 2.5% 127. 2520 10 Gypsum 2.5% 128. 2521 Limestone for metallurgical use conforming to IS:10345-2004 2.5% 129. 2523 29 All goods Nil 130. 2528 Boron ores Nil 131. 2529 22 00 Acid grade fluorspar 5% 132. 25, 28, 38 or 39 The following goods, when imported for use in the manufacture of refractory products falling under Chapters 38, 68 or 69, namely:- 5% – 9 (A)
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
including naphtha), [other than goods mentioned at S. No. 148, 149, 150, 151, 153, petroleum coke falling under tariff item 2713 11 00 or 2713 12 00]] 5% 148. 2710 Naphtha, when imported by RatnagiriGas and Power Private Limited (RGPPL), for use in generation of electricity in the power plants of Ratnagiri Gas and Power Private Limited (RGPPL) at Dabhol, District Ratnagiri, Maharashtra Nil 149. 2710 Naphtha, when imported for generation of electrical energy by a generating company as defined in section 2(28) of the Electricity Act, 2003 (36 of 2003) to supply electrical energy or to engage in the business of supplying electrical energy: Nil Provided that the exemption shall not be available if such naphtha is used for generation of electrical energy by captive generating plant as defined in section 2(8) of the Electricity Act, 2003 (36 of 2003). 150. 2710 or 2714 90 All goods, for the manufacture of Fertilisers Nil – 9 151. 2710 19 Kerosene imported by the Indian Oil Corporation Lim
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
711 Liquefied petroleum gases (LPG), in excess of the quantity of petroleum gases and other gaseous hydrocarbons consumed in the manufacture of polyisobutylene by the unit located in Domestic Tariff Area (DTA), received from the unit located in Special Economic Zone (SEZ) and returned by the DTA unit to the SEZ unit from where such Liquefied petroleum gases (LPG) were received. Nil – 9 Explanation. – For the purposes of this entry, the quantity of the petroleum gases and other gaseous hydrocarbons consumed in the manufacture of polyisobutylene shall be calculated by subtracting from the quantity of the said gases received by the DTA unit manufacturing polyisobutylene, the quantity of the said gases returned by the said unit to the SEZ unit. 156. 2711 12 00 Propane 2.5% 157. 2711 13 00 Butanes 2.5% 158. 38[***] 159. 27 or 34 or 8705 Following material and equipment for construction of roads based on the bio-based asphalt, namely:- Nil – 14 (i) Bio-based asphalt sealer and preservation
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
he 19th July, 2012] Nil – 15 165. 2716 00 00 Electrical energy supplied to DTA from power plants of less than 1000MW, and granted formal approval for setting up in SEZ prior to 12[the 19th July, 2012]- Paisa per KWh (a) imported coal as fuel 24 – 15 (b) domestic coal as fuel 24 – 15 (c) mix of domestic gas/RLNG as fuel 18 – 15 (d) RLNG as fuel 21 – 15 166. 28, 29 or 30 The following goods, namely : – (A) Drugs, medicines, diagnostic kits or equipment specified in List 3 5% (B) Bulk drugs used in the manufacture of drugs or medicines at (A) 5% – 9 167. 28, 29, 30 or 38 The following goods, namely :- Nil (A) Lifesaving drugs/medicines including their salts and esters and diagnostic test kits specified in List 4. (B) Bulk drugs used in the manufacture of life saving drugs or medicines at (A). Nil – 9 (C) Other life saving drugs or medicines Nil – 16 168. 28, 29, 32, 39, 54, 56, 70, 72 or 90 The following goods, namely:- (A) Goods specified in List 5, for the manufacture of telecommunica
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
t polymer; (iii) polyurethane polymer; (iv) vinyl polymer 174. 2801 20 00 Iodine 2.5% 175. Any Chapter Common salt (including Rock Salt, Sea Salt and Table Salt) Nil 176. 2807 00 10 Sulphuric acid for the manufacture of fertilizers 5% 177. 2809 20 10 All goods 5% 120[177A 2810 00 20 Boric Acid 7.5% ] 178. 2818 20 10 All goods 5% 179. 2825 Vanadium pentaoxide or vanadium sludge 2.5% 180. 2825 40 00 Nickel oxide and hydroxide Nil 181. 2841 Ammonium Metavanadate 2.5% 182. 28442000 Sintered natural uranium dioxide, Sintered uranium dioxide pellets (U-235), for generation of nuclear power Nil 183. 2844 Medical use fission Molybdenum-99 (Mo-99) for use in the manufacture of radio pharmaceuticals Nil – 9 184. 2852 or 3822 Pharmaceutical Reference Standard 5% – 18 185. 29(except 29054300, 29054400 and 29337100) All goods 7.5% 186. 29 or 38 Alpha pinene 5% 187. 29 or any Chapter Raw materials intermediates and consumables supplied by the UNICEF for the manufacture of DTP vaccines Nil
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
eriprone Nil – 9 192. 29 or 38 Alkyl esters of long chain fatty acids obtained from vegetable oils, commonly known as bio- diesels 10% 193. 2901, 2902 (except 2902 43 00, 2902 50 00) All goods 2.5% 194. 2902 41 00 o-Xylene Nil 195. 2903 (except 2903 11 10, 2903 12 00, 2903 13 00, 2903 22 00) or 2904 All goods 5% 196. 2902 43 00 p-Xylene Nil 197. 2902 50 00 Styrene 2% 198. 2903 15 00 Ethylene dichloride (EDC) 2% 199. 2903 21 00 Vinyl chloride monomer (VCM) 2% 200. 2905 11 00 Methyl alcohol 5% 201. 2905 31 00 Mono ethylene glycol (MEG) 5% 202. 2907 2300 Bis-phenol A Nil 203. 2910 3000 Epichlorohydrin 2.5% 204. 2914 61 00, 2914 69 90 Anthraquinone or 2-Ethyl Anthraquinone, for use in manufacture of Hydrogen Peroxide 2.5% – 9 205. 2916 12 10 Butyl acrylate 5% 206. 2917 36 00 Purified Terephthalic Acid (PTA), Medium Quality Terephthalic Acid (MTA) and Qualified Terephthalic Acid (QTA) 5% 207. 2917 37 00 Dimethyl terephthalate (DMT) 5% 208. 2926 10 00 Acrylonitrile 2.5% 209.
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
sera, namely: – Nil Anti C., anti E., anti c., anti e., anti M., anti N., anti Le., anti Pl., anti S., anti human globulin sera, anti F., anti kell, anti cellane, anti Jka., and anti I 216. Any Chapter Artificial kidney Nil 217. Any Chapter All types of contraceptives Nil 218. 30029030 Probiotics 5% 219. 31(Except 31022100, 31025000, 31043000, 31052000, 31053000, 31054000, 31055100, 31055900, 31056000, 31059010, 31059090) All goods 7.5% 220. 31 Kyanite salts, in a form indicative of their use for manurial purpose 5% 221. 31 Muriate of potash, for use as manure or for the production of complex fertilisers 5% 222. 31 Ammonium phosphate or ammonium nitro-phosphate, for use as manure or for the production of complex fertilisers 5% 223. 31 Composite Fertilisers 5% 224. 31 Potassium Nitrate, in a form indicative of its use for manurial purpose 5% 225. 31 I. The following Water Soluble Fertilizers included in Schedule 1, part A of the Fertilizers Control Order, namely:- (a) Potassi
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
wall lamp / ceiling lamp / door lamp / window lamp / garden lamp 133[/wire roll/Christmas ornamentation] Nil – 21 (b) Hinges, metal locks and back of photo frames, and fittings for photo frame / box; (c ) Wax items for candle holder / votive / cup; (d) Chemicals / lacquer required for improved finish of export product ; (e) Motifs for attachment on export product; (f) Severe atmospheric corrosion inhibitor (SACI) used as rust preventive concentrate for coating on ornamental painted and unpainted cast iron artware ; (g) Heat resistant paint used on cast iron items for ornamental fire place accessories; (h) Wood polish materials ; and (i) Poly films used for shrink wrapping and cling – wrapping of artwares (j) Wooden biscuit (splings-joining accessory for wooden board); (k) Decorative paper for lamp shade; (l) Sea shell, Mother of Pearl (MOP), Cattle horn and Bone Materials; (m) Prints for photo frames (n) Animal hair materials for brushes; (o) Copper adhesive tape 1/2 or less; (p) adhes
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
le cutters, fret saw/band saw blades; (zk) Diamond wheels/ drills; (zl) Abrasive emery paper / belts/ circular disk; (zm) Compact Fluorescent Lamps (CFL) and bulbs of 120 volts; (zn) Polyurethane coated fabric, synthetic leather fabric, raffia fabric, rayon raffia fabric, paper raffia fabric; (zo) Inlay cards, labels, tags, sensors, stickers, printed bags, plastic clear sheets and bags, nylon / polyester / Poly Vinyl Ether (PVE) mesh and fabrics, reflective tapes, fashion tapes, masking tapes, double side tapes, self- adhesive pads, poly bags, alarm tags, alarm chips, security chips; (zp) Zipper, zipper head, fastener, puller and slider, eyelets, hooks, eyes, rivets, studs, buttons, magnet buttons, buckles, tape, elastic tape, adhesive tape, re-enforcement tape, velcro tape, hook tape, loop tape, elastic cloth, elastic band, quilted wadding materials accessories, polywadding materials, fusible embroidery motifs and prints, embroidery thread, sewing thread, stones (other than precious a
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
es; (zzc) Jewellery findings, attachments and components (made of metals other than gold, silver and platinum and not containing precious/semi-precious stones); (zzd) Laminating films; (zze) Elastic gel; (zzf) Cords of leather / cotton / satin, ribbons and plastic seal; (zzg) Faucet / lotion pump for dispensers of plastic/stainless steel/metal; (zzh) Soldering water and acid water; (zzi) Amino resins and polyurethanes in combination for use as adhesive; (zzj) Film of high density polymers of ethylene, vinyl paper; (zzk) Chemicals for treatment of wood and wood worms/wood insects; (zzl) Glass melting pots with ring made of clay refractory materials; (zzm) Selenium and borax; (zzn) Cutting wheels for glass; (zzo) Art brushes and brushes for special handicraft applications; (zzp) Decorative mouldings for furniture and art framing; (zzq) Magnets, magnet buttons; (zzr) Anti-reflective glass of 1.5 mm to 10 mm thickness; (zzs) Canvas stretcher bar.] 230. 32, 84 or 96 Ink cartridges, ribbon a
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
, of an alcoholic strength by volume exceeding 0.5 per cent. Volume, determined at 20 degrees centigrade) 10% 240. 3403 All goods 7.5% – 241. 3404 20 00 Vinyl Polyethylene Glycol for use in manufacture of Poly Carboxylate Ether 7.5% – 9 242. 35 The following goods for use in the manufacture of Plasma Volume Expanders, namely:- (i) Hydroxyethyl starch, (ii) Dextran 5% – 9 243. 3504 Isolated soya protein 10% 244. 37 Colour positive unexposed cinematographic film in jumbo rolls and colour negative unexposed cinematographic film in rolls of 400 feet and 1000 feet 5% 245. 3701 20 00 or 3702 Instant print film 5% 246. 3704 Cinematographic films, exposed but not developed Nil 247. Any Chapter Promotional material (like Trailers, making of film etc.) imported in the form of electronic promotion kits (EPK)/ beta cams Nil – 23 248. 38 Dipping oil, Paclobutrazol (Cultar) 10% 249. 38 Bio-pesticides, based on – (i) Bacillus thuringiensis var. kurstaki (ii) Bacillus thuringiensis var. israelen
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
manufacture of cast components of Wind Operated Electricity Generator 5% – 24 256. 39 Ethylene vinyl acetate (EVA) 7.5% 257. 39, 48 or any other Chapter Tags, labels, stickers, belts, buttons or hangers, imported by bonafide exporters Nil 258. 39 or any chapter Security fibre, security threads, M-feature for use in the manufacture of security paper by Security Paper Mill, Hoshangabad and Bank Note Paper Mill India Private Limited, Mysore. Nil – 9 259. 39 or any Chapter Raw materials for use in manufacture of security fibre and security threads for supply to Security Paper Mill, Hoshangabad and Bank Note Paper Mill India Private Limited, Mysore for use in manufacture of security paper. Nil – 9 260. 39, 72 and 81 The following goods, for the manufacture of orthopaedic implants falling under sub-heading 9021 10, namely:- (i) Special grade stainless steel; Nil – 9 (ii) Titanium alloys; Nil – 9 (iii) Cobalt-chrome alloys; Nil – 9 (iv) High-density polyethylene Nil – 9 261. 39 or 74 (i) Al
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
yarn Nil – 9 272. 3907 40 00 Polycarbonates 5% 273. 3908 Nylon chips 7.5% 274. 39139090 Compostable polymer or bio-plastic used in the manufacture of bio degradable agro mulching films, nursery plantation pots and flower pots. Nil – 9 275. 3919 90 90 Water blocking tape for use in the manufacture of insulated wires and cables falling under heading 8544 (except sub-heading 8544 11) 7.5% – 9 276. 4002 70 00 Ethylene – propylene – non-conjugated diene rubber (EPDM) for use in the manufacture of insulated wires and cables falling under heading 8544 (except sub-heading 8544 11) 7.5% – 9 277. 6814 90 90 Mica glass tape for use in the manufacture of insulated wires and cables falling under heading 8544 (except sub-heading 8544 11) 7.5% – 9 278. 3920 Subbed polyester base, imported by M/s Hindustan Photo Films manufacturing Company Limited, Udhagamandalam for the manufacture of medical or industrial X-ray films and graphic art films. Nil 279. 40 New or retreaded Pneumatic tyres of rubber of
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
58, 59 or 60 Lining and inter-lining materials Nil – 28 289. 4401 21 00, 4401 22 00 Wood in chips or particles, imported for use in manufacture of the following, namely:- (i) paper and paperboard; (ii) newsprint. Nil – 9 290. 47 Pulp of wood or of other fibrous cellulosic material (excluding rayon grade wood pulp) when used for the manufacture of the following, namely :- (i) newsprint; Nil – 9 and 29 (ii) paper and paperboard; Nil – 9 (iii) adult diapers; Nil – 9 (iv) all goods falling under chapter heading 9619, other than adult diapers. 2.5% – 9 291. 4702 Rayon grade wood pulp 2.5% 292. 4707 (A) All goods imported for use in, or supply to, a unit for manufacture of paper or paperboard other than newsprint; Nil – 30 (B) All goods, imported for use in, or supply to, a unit for manufacture of news print Nil – 30 293. 48 Grape guard, namely, paper of a type generally used for the packing of grapes and which consists of two sheets of treated white paper pressed together with thin rectan
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
per, imported by the Bank Note Press, Dewas, the Currency Note Press, Nasik, the India Security Press, Nasik, the Security Printing Press, Hyderabad, the Bhartiya Reserve Bank Note Mudran Limited, Mysore, or the Bhartiya Reserve Bank Note Mudran Limited, Salbony Nil 297. 4810 Light weight coated paper weighing upto 70 g/m², imported by actual users for printing of magazines Nil 54[297A. 4823 90 90 All goods other than kites 10% ] 298. 49 or 8523 The following goods, namely:- (i) Information Technology software, And (ii) Document of title conveying the right to use Information Technology software. Explanation.- Information Technology software means any representation of instructions, data, sound or image, including source code and object code, recorded in a machine readable form, and capable of being manipulated or providing interactivity to a user, by means of an automatic data processing machine. Nil 299. 49 Commonwealth and international reply coupons and UNESCO coupons Nil
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
ar stays, collar patties, butterfly and other garment stays including plastic stays; (i) Fusible and non-fusible embroidery motifs or prints; (j) Laces; (k) Badges including embroidered badges; (l) Embroidery threads; (m) Sewing thread; (n) Stones (other than precious and semi precious); (o) Sequin; (p) Tape, Elastic tape and hook tape of width not exceeding 75 mm; (q) Velcro tape; (r )Cord and cord stopper; (s) Toggles; (t) Polywadding materials; (u)Stud; (v) Elastic cloth and elastic band; (w) Quilted wadding materials; (x) Beads for embroidery; (y) sample fabric of total length upto 1000 metre imported during one financial year; (z) printed bags; (za) Knitted ribs; (zb) anti-theft devices like labels, tags and sensors; (zc) bobbin elastic; (zd) textile flowers; (ze) water soluble lining, poly pouch, high density sticker, heat transfer sticker; (zf) anglets on draw strings-hooded jacket; (zg) bra cup, bust cup, moulded cups for bra and metal underwire for bra; (zh) hook and bar, extr
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
les and sheets therefor; (n) Shanks and welts; (o) Toe Caps and toe puffs and counters or Thermoplastic sheets; (p) Synthetic or polymeric foam; (q) packaging boxes/envelops/pouches of all types; (r) Ribs (s) adhesives; (t) Unit soles and sheets of Polyurethane, Thermoplastic rubber, Polyvinyl Chloride, Thermoplastic Polyurethane, Phylon, Nitrile Butadiene Rubber, Styrene Butadiene Rubber for soles including Polyurethane paint, colour paste and pigments; (u) heels; (v) leather board; (w) saddle tree; (x) nylon mesh (y) Fittings, snaps of metals or alloys; (z) Metal fittings / embellishments, webbing of any material for making harness and saddler items; (za) Stirrup of any material and stirrup bars used for making Saddle Tree; (zb) Nylon polyester/PVE mesh and fabrics for making non-leather harness and saddler items; (zc) Beading material – synthetic / leather / fabric; (zd) Chatons / stones / beads / crystals as decorative items; (ze) Shoe laces; (zf) Stretch fabric for shoe uppers; (z
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
l goods Nil 315. 5202 All goods Nil 316. 5301 All goods Nil 317. 5303 10 Raw jute 5% 318. 5401, 5402, 5403, 5404, 54050000 or 5406 All goods, other than those of nylon 5% 319. 5402, 5403, 5404, 54050000 or 5406 All goods of nylon 7.5% 320. 5402 19 90 Nylon 66 filament 2.5% 5402 52 00 Polyester yarn-Anti Static Filament 5503 11 00 Aramid Flame Retardant Fibre 5503 11 00 Para- aramid Fibre 5503 19 00 Nylon Staple Fibre 5503 19 00 Nylon Anti Static Staple fibre 5503 30 00 Modacrylic fibre 5504 10 00 Flame Retardant Viscose Ryon Fibre 321. 5501 to 5510 All goods, other than those of nylon 5% 322. 5501 to 5510 All goods, of nylon 7.5% 323. 5511 All goods 10% 324. Any Chapter Monofilament long line system for tuna fishing 5% – 34 325. 5404 19 90 Monofilament yarn 5% – 35 326. 56031100 Hydrophilic Non-Woven, Hydrophobic Non- Woven, imported for use in the manufacture of Adult Diapers 5% – 9 327. 57 Samples of hand knotted carpets Nil – 36 328. 5902 20 Polyester tyre cord fabric 5%
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
. 6802 10 00, 6802 21 10, 6802 21 20, 6802 21 90, 6802 91 00, 6802 92 00 Marble slabs 20% 337. 6802 23 10, 6802 23 90, 6802 29 00, 6802 93 00 Granite slabs 20% 55[338. 6815 91 00, 6901, 6902, or 6903 All goods 7.5% ] 339. 70 Toughened glass with low iron content and transmissivity of minimum 91% and above, for use in solar thermal collectors or heaters 5% – 9 340. 70 Solar tempered glass or solar tempered (anti-reflective coated) glass for use in manufacture of solar cells/panels/modules 56[Nil] – 9 341. 70 Preform of silica for use in the manufacture of telecommunication grade optical fibres or optical fibre cables. 57[5%] – 9 342. 7001 00 10 All goods 5% 343. 7015 Rough ophthalmic blanks, for manufacture of optical lenses 5% 344. 71 The following goods, namely:- (i) Raw pearls; 5% (ii) Rubies, emeralds and sapphires, unset and imported uncut Nil 345. 71 Rough diamonds (industrial or non- industrial) Nil 346. 71 Rough coloured gemstones Nil 347. 71 Rough semi-precious stones N
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
8 Silver, in any form including ornaments, but excluding ornaments studded with stones or pearls, imported by the eligible passenger 10% – 41 358. 71 (i) Gold bars, other than tola bars, bearing manufacturer s or refiner s engraved serial number and weight expressed in metric units; 10% (ii) Gold coins having gold content not below 99.5% and gold findings, other than imports of such goods through post, courier or baggage. 10% Explanation.- For the purposes of this entry, gold findings means a small component such as hook, clasp, clamp, pin, catch, screw back used to hold the whole or a part of a piece of jewellery in place. 359. 71 (i) Silver, in any form, other than medallions and silver coins having silver content not below 99.9% or semi-manufactured forms of silver falling under sub-heading 7106 92; 10% (ii) Medallions and silver coins having silver content not below 99.9% or semi-manufactured forms of silver falling under sub-heading 7106 92, other than imports of such goods thr
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
. 7204 21 Scrap of stainless steel, for the purpose of melting 2.5% 370. 7206, 7207, 7213, 7214, 7215, 7216, 7217, 7221, 7222, 7223, 7225 (except 7225 11 00, 7225 3090, 7225 4019, 7225 50 or 7225 9900), 7226 (except 7226 11 00) 7227 or 7228 All goods 10% 371. 7208, 7209, 7210, 7211, 7212, 7225 30 90, 7225 40 19, 7225 50 or 7225 99 00 126[All goods other than those at serial number 371A] 12.5% 127[371A 72101210, 721012 90 All goods 12.5% 371B 72191200, 72191300, 72192190, 721990 90 All goods 7.5% ] 372. 7208 Hot rolled coils for use in manufacture of welded tubes and pipes falling under heading 7305 or 7306 10% – 9 373. 7212 40 00 Co-polymer coated MS tapes / stainless steel tapes for use in manufacture of telecommunication grade optical fibres or optical fibre cables 10% – 9 374. 7225 19 90 Magnesium Oxide (MgO) coated cold rolled steel coils for use in manufacture of cold rolled grain oriented steel (CRGO) falling under 7225 11 00 5% – 9 375. 7225 The following goods, namely: – (i
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
parts for use in the manufacture of electrical insulators falling under heading 8546 7.5% – 9 379. 73 Pipes and tubes for use in manufacture of boilers 7.5% – 9 380. 7326 90 99 Forged steel rings for manufacture of special bearings for use in wind operated electricity generators 5% – 24 381. 7408 Flat copper wire for use in the manufacture of photo voltaic ribbon (tinned copper interconnect) for manufacture of solar photovoltaic cells or modules Nil – 9 382. 7404 00 22 Brass scrap 2.5% 383. 7411 or 7412 All goods 7.5% 384. 75 All goods Nil 385. 7602 Aluminium scrap 2.5% 386. 7806 Lead bars, rods, profiles and wire 5% 387. 79 Zinc metal recovered by toll smelting or toll processing from zinc concentrates exported from India for such processes 10% – 42 388. 7907 Zinc tubes, pipes and tube or pipe fittings 7.5% 389. 8007 Tin plates, sheets and strip, of a thickness exceeding 0.2 mm; tin foil (whether or not printed or backed with paper, paperboard, plastics or similar backing mater
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
for use in high voltage power transmission project 5% – 45 398. Any Chapter Parts and components of the goods specified in List 10 required for use in high voltage power transmission project 5% – 9 and 45 399. 84 or any other Chapter The following goods (other than old and used) for use in man-made or synthetic fibre or yarn industry, namely:- (1) Machinery or equipment specified in List 11; 5% (2) Parts for manufacture of the goods at (1) 5% – 9 400. 84 or any other Chapter The following goods(other than old and used) for use in textiles industry; namely:- (1) Machinery or equipment specified in List 12; 5% (2) Parts for manufacture of the goods at (1) 5% – 9 401. Any Chapter All items of equipment including machinery and rolling stock, procured by or on behalf of Delhi Metro Rail Corporation Ltd. for use in- (i) Delhi MRTS Project Phase-I; and (ii) Specified corridors of Delhi MRTS Project Phase-II, comprising of the following, namely:- (a)Vishwavidyalaya- Jahangirpuri; (b) Central
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
connection with the purposes of off- shore oil exploration or exploitation Nil – 47 404. 84 or any other Chapter Goods specified in List 33 required in connection with: (a) petroleum operations undertaken under petroleum exploration licenses or mining leases, granted by the Government of India or any State Government to the Oil and Natural Gas Corporation or Oil India Limited on nomination basis, (b) petroleum operations undertaken under specified contracts (c) petroleum operations undertaken under specified contracts under the New Exploration Licensing Policy (d) petroleum operations undertaken under specified contracts under the Marginal Field Policy (MFP) (e) coal bed methane operations undertaken under specified contracts under the Coal Bed Methane Policy Nil 5% 48 405. 84 or any other Chapter The following goods, namely:- (1) Wind operated electricity generators upto 30 KW and wind operated battery chargers upto 30 KW 5% – 49 (2) Parts of wind operated electricity generators, for
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
for the purpose of this entry means goods which are designed exclusively for non-ODS technology Nil – 50 408. 84 or any other Chapter (A) Machinery, instruments, apparatus and appliances, as well as parts (whether finished or not) or raw materials for the manufacture of aforesaid items and their parts, required for renovation or modernization of a fertilizer plant; and (B) spare parts, other raw materials (including semi-finished material) or consumables stores, essential for maintenance of the fertilizer plant mentioned above 5% _ 51 409. 84 or any other Chapter Goods specified in List 13 required for setting up crude petroleum refinery 5% 410. 84 or any other Chapter The following goods, namely:- (1) Kits required for the conversion of motor- spirit or diesel driven vehicles into Compressed Natural Gas driven or Propane driven or Liquefied Petroleum Gas driven vehicles; (2) Parts of the kits specified at (1) 5% – 52 411. 84 or any other Chapter Goods specified in List 14 required f
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
ash Coat (falling under CTH 3824 99 90) 5% – 9 416. 2825 60 20 Ceria zirconia compounds for use in the manufacture of washcoat for catalytic converters 5% – 9 417. 2846 10 90 Cerium compounds for use in the manufacture of washcoat for catalytic converters 5% – 9 418. 3824 90 90 Zeolite for use in the manufacture of washcoat for catalytic converters 5% – 9 419. 2818 20 90 Aluminium Oxide for use in the manufacture of washcoat for catalytic converters 5% – 9 420. 2818 20 90 Clay 2 Powder (Alumax) for use in ceramic substrate for catalytic convertors 5% – 9 421. 84, 85 or 90 (i) Goods specified in List 16, other than those falling under tariff items 8517 61 00, 8517 62 90, 8517 69 90, required for basic telephone service, cellular mobile telephone service, internet service or closed users s group 64 KBPS domestic data network via INSAT satellite system service (ii) Parts, for manufacture of the goods at (i) Nil Nil 55 9 422. 84, 85 or 90 Machinery, electrical equipment, other instruments
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
lowing goods, imported by an accredited press cameraman:- (i) Photographic cameras; (ii) cinematographic cameras; (iii) digital cameras; and (iv) lenses, filters, flash light apparatus and exposure meters required for use with the aforesaid cameras Nil – 58 429. 84, 85 or 90 The following goods, imported by an accredited journalist:- (i) Personal computers including lap top personal computers; (ii) typewriters; and (iii) fax machines Nil – 59 430. 84, 85 or 90 (1) The following goods for use in pharmaceutical and biotechnology sector, imported for research and development purposes, by an importer registered with the Department of Scientific and Industrial Research, in the Ministry of Science and Technology of the Government of India, namely:- (a) Goods specified in List 21 5% – 60(i) (b) Goods specified in List 22 Nil – 60(i) (2) The following goods for use in the pharmaceutical and biotechnology sector, imported by a manufacturer, having a research and development wing registered with
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
oods (other than old and used) for use in the silk textile industry, namely:- (i) Machinery or equipment specified in List 26, required for reeling, weaving, twisting, processing and printing; 5% – 9 (ii) Automatic reeling/ dupion reeling machines and their accessories including cocoon assorting machines, cocoon peeling machines, vacuum permeation machine, cocoon cooking machine, reeled silk humidifier, bale press and raw silk testing equipments Nil 435. 84 or any Chapter The following goods, namely:- (A) High speed cold-set web offset rotary double width four plate wide printing machines with a minimum speed of 70,000 copies per hour or High speed Heat-set web offset rotary printing machines with a minimum speed of 70,000 copies per hour; 5% (B) Mailroom equipment suitable for use with (A), namely:- (i) overhead conveyor gripper; (ii) stacker; (iii) wrapper; (iv) labeller; (v) strapper; (vi) inserters; (vii) delivery conveyors 5% – 31 436. 84 or 85 Spares, supplied with outboard mot
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
printing and minting corporation of India limited (SPMCIL), namely:- (i) Fully automatic sachet packaging machinery or equipment or plant, its spares; (ii) Plant or machinery or equipment, related spares and consumables from the manufacture of CWBN paper and other security paper; (iii) Plant or machinery or equipment, related spares and consumables for printing of banknotes; (iv) Photogravure printing machine with embossing or de-bossing facility; (v) Plant or machinery or equipment, its spares and consumables for manufacture of e-passport; (vi) Plant or machinery or equipment, its spares and consumables for inspection and processing of banknotes. 5% 444. 84 Geothermal ground source heat pumps Nil 445. 84 or any other Chapter Following goods for making of gem and jewellery – (1) Automatic Chain Making machine, (2) chain twisting machine, (3) Spiral making machine, (4)Rolling machine (combined Profile Groovers/Strip Making) and (5) Automatic Investing Machine/casting Machine. 5% 446.
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
er heading 8703, or (iii) motor cycles falling under heading 8711. 7.5% 448B. 8407 Outboard Motors 5% 448C. 8408 All goods other than engines of- (i) motor vehicles falling under heading 8702 or 8704; (ii) motor cars falling under heading 8703; or (iii) motor cycles falling under heading 8711. 7.5% 448D. 8409 All goods other than parts suitable for use solely or principally with the engines, of heading 8407 or 8408, of a kind used in- (i) motor vehicles falling under heading 8702 or 8704; (ii) motor cars falling under heading 8703; or (iii) motor cycles falling under heading 8711. 7.5% 448E. 8483 10 91 All goods other than Crank shaft for engines falling under heading 8407 of- (i) motor vehicles falling under heading 8702 or 8704; (ii) motor cars falling under heading 8703; or (iii) motor cycles falling under heading 8711. 7.5% 448F. 8483 10 92 All goods other than Crank shaft for engines falling under heading 8408 of- (i) motor vehicles falling under heading 8702 or 8704; (ii) mo
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
Micro Irrigation equipment 5% 5% – 457. 84362100 All goods 5% 458. 8438 All goods 5% 459. 8443 Parts for manufacture of printers falling under sub heading 8443 32 except 8443 99 51, 8443 99 52, 8443 99 53 Nil – 9 460. 8446, 8448 The following goods(other than old and used) for use in the textile industry, namely:- (i) Shuttle less looms; Nil (ii) parts and components for manufacture of the goods at (i) Nil – 9 461. 8444, 8445, 8446, 8447, 8448, 8449 All goods 5% 141[461A 8448 The following goods, namely: – (i) High Speed Dobby mechanical or electronic (300 rpm and above) (tariff item 8448 19 00); (ii) High Speed Jacquard mechanical or electronic (300 rpm and above) (tariff item 8448 19 00); (iii) Automatic Yarn Splicers for Automatic Cone Winders (tariff item 8448 32 90); (iv) Spindle Motor for Automatic Cone Winders (tariff item 8448 32 90); (v) Grooved Winding Drums for Automatic Cone Winders (tariff item 8448 32 90); (vi) Compact Spinning attachment (tariff item 8448 39 90); (
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
acture of CNC Lathes (tariff items 8458 11 00, 8458 91 00), Machining Centers (tariff items 8457 10 10, 8457 10 20) or all types of CNC machine tools falling under headings 8456 to 8463] 2.5% – 9 463. 8466 93 90 63[Linear Motion Guides for use in the manufacture of CNC Lathes (tariff items 8458 11 00, 8458 91 00), Machining Centers (tariff items 8457 10 10, 8457 10 20) or all types of CNC machine tools falling under headings 8456 to 8463] 2.5% – 9 464. 8537 10 00 64[CNC Systems for use in the manufacture of CNC Lathes (tariff items 8458 11 00, 8458 91 00), Machining Centers (tariff items 8457 10 10, 8457 10 20) or all types of CNC machine tools falling under headings 8456 to 8463] 2.5% – 9 465. 8471 CD -Writers Nil 466. 84 or any other Chapter (a) Parts, components or accessories for use in the manufacture of tablet computer. (b) Sub-parts for use in the manufacture of items mentioned at (a) above. Nil Nil 9 9 467. 21[8472 90 or 8473 40] The following goods, namely:- (i) Cash dispens
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
– 55 or 56 or 57, and 65 476. 85 or any other Chapter Television equipment, cameras and other equipment for taking films, imported by a foreign film unit or television team Nil Nil 66 477. 85 or any other Chapter Photographic, filming, sound recording and radio equipment, raw films, video tapes and sound recording tapes of foreign origin, if imported into India after having been exported therefrom. Nil Nil 67 478. 85 or any other Chapter The wireless apparatus, accessories and parts specified in List 29, imported by a licensed amateur radio operator 5% – 68 479. 85 or any other Chapter The following goods, namely:- (1) Mono or Bi polar Membrane electrolysers and parts thereof including secondary brine purification components, jumper switches, filtering elements for hydrogen filters and any other machinery, required for, – (i) modernization by using membrane cell technology, of an existing caustic soda unit or caustic potash unit, or (ii) capacity expansion of an existing caustic soda
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
the blind Nil 485. 85 Deflection components for use in colour monitors for computers or for use in PCBs of colour monitors for computers Nil – 9 486. 8501 (except 8501 64 70, 8501 64 80), All goods 7.5% 487. 8502(except 8502 11 00, 8502 20 10, 8502 40 00), All goods 7.5% 488. 8503 00 10, 8503 00 21 or 8503 00 29 All goods 7.5% 489. 8504 10 10, 8504 10 20 or 8504 10 90 All goods 7.5% 65[489A. 8511 All goods other than of a kind used in conjunction with engines of:- (i) motor vehicles falling under heading 8702 or 8704; (ii) motor cars falling under heading 8703; or (iii) motor cycles falling under heading 8711. 7.5% ] 490. 8537 All goods 7.5% 66[491. 8544 (except, 8544 70 10 or 8544 70 90) All goods (other than USB Cable for cellular mobile phone) 7.5% ] 492. 8546 All goods 7.5% 493. 8547 All goods 7.5% 494. 9028 90 10, 9030 31 00, 9030 90 10, 9032 89 10, 9032 89 90 All goods 7.5% 495. 144[8507] Batteries for electrically operated vehicles, including two and three wheeled elec
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
niversity Grants Commission for use in Computers 5% – 73 502. 8525 80 20 98[Digital Still Image Video Cameras other than Camera or Camera Module of cellular mobile phones] Nil 39[502A 8525 80 All goods other than CCTV Camera/IP camera 10% ] 503. 8523 Foreign Satellite data on storage media imported by National Remote Sensing Centre (NRSC), Hyderabad Nil 504. 85 or any other Chapter Parts and Components of Digital Still Image Video Cameras Nil – 9 505. 8529 Parts of Set-top Box, for use in the manufacture of Set-top Box, namely:- (i)Tuner (ii) RF modulator (iii) Remote control unit (iv) SMPS power board (v) IR module; Nil – 9 506. 85 or any other Chapter (a) Parts, components and accessories except populated printed circuit boards for use in manufacture of broadband modem falling under tariff item 8517 62 30; (b) Sub-parts for use in manufacture of items mentioned at (a) above. Nil – 9 507. 85 or any other Chapter (a) Parts, components and accessories except populated printed circuit
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
ub-parts for use in manufacture of items mentioned at (a) above. Nil – 9 511. 85 or any other Chapter (a) Parts, components and accessories except populated printed circuit boards for use in manufacture of CCTV Camera /IP camera falling under 8525 80 20; (b) Sub-parts for use in manufacture of items mentioned at (a) above. Nil – 9 512. 85 or any other Chapter 146[(a) Parts, components and accessories except: – (i) Lithium ion cell (falling under tariff item 8507 60 00) and; (ii) Printed Circuit Board Assembly (PCBA) (falling under tariff item 8507 90 90) for use in manufacture of lithium-ion batteries other than batteries of mobile handsets including cellular phones falling under tariff item 8507 60 00; (b) Sub-parts for use in manufacture of items mentioned at (a) above] Nil – 9 513. Any Chapter (a) Parts or components for use in manufacture of populated printed circuit board of,- (i) Lithium-ion battery other than battery for mobile handset tariff item 8507 60 00; (ii) Broadband mode
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
Film, top; (vi) Film, middle; (vii) Film, bottom; (viii) BAR, LED; (ix) Bezzal; (x) Back cover sheet; (xi) Black Light Unit Module. 10% – 9 516A. 8529 10 99 8529 90 90 Parts suitable for use solely or principally with the apparatus of headings 8525, 8526 or 8527 10% 516B. 8529 10 99 8529 90 90 Parts suitable for use solely or principally with the apparatus of headings 8528, namely :- (i) other cathode ray tube monitors (8528 49 00); (ii) other monitors (8528 59 00); (iii) other projectors (8528 69 00); (iv) reception apparatus for television, whether or not incorporating radio broadcast receivers or sound or video recording or reproducing apparatus, – (a) not designed to incorporate a video display or screen (8528 71 00); and (b) other Monochrome (8528 73). 10% ] 517. 8540 71 00 Magnetron of up to 1.5KW used for the manufacture of domestic microwave Ovens Nil – 9 518. 8548 10 10 or 8548 10 20 Battery scrap and battery waste 5% 519. Any Chapter Raw materials or parts for use in manufa
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
Power Control Unit, Energy Monitor Contractor, Brake system, Electric Compressor not mounted on chassis; 10% (b) pre-assembled Battery Pack, Motor, Motor Controller, Charger, Power Control Unit, Energy Monitor Contractor, Brake System, Electric Compressor not mounted on a chassis or a body assembly 15% (2) in a form other than (1) above 25% ] 526. 8703 Motor cars and other motor vehicles 150[(excluding electrically operated vehicles)] principally designed for the transport of persons (other than those of heading 87.02), including station wagons and racing cars, new, which have not been registered anywhere prior to importation, If imported,- (1) As a Completely Knocked Down (CKD) kit containing all the necessary components, parts or sub-assemblies, for assembling a complete vehicle, with,- (a) engine, gearbox and transmission mechanism not in a pre-assembled condition; 72[15%] (b) engine or gearbox or transmission mechanism in pre-assembled form but not mounted on a chassis or a body
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
F value more than US$ 40,000 100% (b) other than (a) above 60% ] 152[527. 8507 60 00 Lithium ion cell for use in manufacture of Lithium ion accumulator other than the following, namely: – (a) Battery pack of cellular mobile phone; and (b) Power bank. 5% – 9] 528. Any Chapter The following goods for use in the manufacture of Electrically operated vehicles, including two and three wheeled electric motor vehicles. Explanation: For the purposes of this entry, electrically operated vehicles means vehicles which are run solely on electrical energy derived from an external source or from one or more electrical batteries fitted to such road vehicles and shall include electric motor assisted cycle rickshaw driven by rechargeable solar batteries, also known as soleckshaw , namely:- 153[******] (ii) Battery Charger; (iii) AC or DC Motor; (iv) AC or DC Motor Controller 154[(v) Power Control unit (inverter, AC/DC converter, condenser); (vi) Energy monitor; (vii) Contactor; (viii) Brake system for
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
30. 8704 Refrigerated motor vehicles Nil 73[530A. 8708 All goods other than parts and accessories of the motor vehicles of heading 8702 to 8704 10% ] 88[531. 8711 Motor cycles (including mopeds) and cycles fitted with an auxiliary motor, 157[(excluding electrically operated motor cycles and cycles)] with or without side cars, and side cars, new, which have not been registered anywhere prior to importation- (1) as a completely knocked down (CKD) kit containing all the necessary components, parts or sub-assemblies, for assembling a complete vehicle, with- (a) engine, gearbox and transmission mechanism not in a pre-assembled condition; 15% (b) engine or gearbox or transmission mechanism in pre-assembled form, not mounted on a body assembly; 25% (2) in a form other than (1) above. 50% ] 159[531 A 8711 Electrically operated motor cycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side cars, and side cars, if imported, – (1) As a knocked down kit containi
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
a) Nil – 9 536. 88 or any other Chapter Parts, testing equipment, tools and tool-kits for maintenance, repair, and overhauling of (i) aircraft falling under heading 8802 or (ii) components or parts, including engine, of aircrafts of heading 8802 by the units engaged in such activities. Nil – 75 537. 8802 (except 8802 60 00) All goods Nil Nil 76 538. 8803 Components or parts, including engines, of aircraft of heading 8802 Nil – 77 43[539. 88 or any other Chapte (a) Satellites and payloads; (b) Ground equipments brought for testing of (a) Nil Nil 78] 44[539. 88 or any other Chapter Scientific and technical instruments, apparatus, equipment, accessories, parts, components, spares, tools, mock ups and modules, raw material and consumables required for launch vehicles and satellites and payloads 5 5 78] 540. 8802 (except 8802 60 00) All goods Nil – 79 541. 8802 Helicopters 2.5% 542. 8802 (except 8802 60 00) All goods Nil – 80 543. 8802 (except 8802 60 00) All goods 2.5% – 81 544. Any Chapt
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
els for the transport of meat, fruit or the like, vessels specified for the transport of particular goods (grain, coal, ores or the like); tankers (petrol, wine or the like); yachts and other sailing vessels; cable ships; ice-breakers; floating factories of all kinds (for processing whales, preserving fish or the like) whale catchers; trawlers and other fishing vessels; life boats, scientific research vessels; weather ships; vessels for the transportation or mooring of buoys; pilot-boats; hopper barges for the disposal of dredged material or the like; (b) war ships of all kinds including submarines; (c ) tugs, dredgers, fire-floats and salvage ships; and (d) oil rigs, drilling ships and jack-up rigs. Nil – 9 550. 89 or any Chapter Spare parts and consumables for repairs of ocean going vessels registered in India. Nil – 83 551. 8901 All goods (excluding vessels and other floating structures as are imported for breaking up) Nil – 84 552. 8902 00 10 Trawlers and other fishing vessels Nil
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
apter Raw materials and parts, for use in the manufacture of goods falling under heading/tariff item 8901, 8902, 8904 00 00, 8905 (except tariff item 8905 20 00) or 8906 Explanation.- For the purposes of this entry, it is clarified that in the case of raw materials and parts already imported under S.No. 558 above and lying unutilized,- ( i) the unit will furnish a separate bond to the jurisdictional jurisdictional Deputy Commissioner of Central tax or the Assistant Commissioner of Central tax or the Deputy Commissioner of State tax or the Assistant Commissioner of State tax, as the case may be, giving details of such goods and also undertake to utilize the same for manufacture of goods falling under heading/tariff item 8901, 8902, 8904 00 00, 8905 (except tariff item 8905 20 00) or 8906; and (ii). In the event of failure to use such goods for the specified purpose, the unit shall pay on demand, an amount equal to the duty payable on such goods but for the exemption under this notificat
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
ny oth- er Chapter The following goods for use in the manufacture of Flexible Medical Video Endoscope (heading 9018), namely :- (i) CCD/CMOS Camera Sensor; (ii) Main printed circuit board of CCD/CMOS Camera Sensor; (iii) Objective Lens for CCD/CMOS Camera Sensor; (iv) Light Guide/Image Guide optical fiber bundle; (v) Ultrasound Transducer; (vi) Main printed circuit board of Ultrasound Transducer. 2.5% – 9 566. Any Chapter Polypropylene, Stainless steel Strip and Stainless steel capillary tube required for manufacture of syringes, needles, catheters and cannulae 2.5% – 9 567. Any Chapter Stainless steel tube and wire, cobalt chromium tube, Hayness alloy-25 and polypropylene mesh required for manufacture of Coronary stents / coronary stent system and artificial heart valve Nil – 9 568. Any Chapter Parts and components required for manufacture of Blood Pressure Monitors and blood glucose monitoring system (Glucometers) 2.5% – 9 569. Any Chapter The following goods, namely:- (a) Ostomy pro
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
bs (b) Parts of goods at (a) Nil Nil – 574. 90 or any other Chapter Parts for the manufacture of hearing aids including deaf aids Nil 575. 90 or any other Chapter Hospital Equipment (equipment, apparatus and appliances, including spare parts and accessories thereof, but excluding consumable items) for use in specified hospitals 5% – 87 576. 90 or any other Chapter Blood Glucose Monitoring System(Glucometer) and test strips 5% 577. 90 or any other Chapter Lifesaving medical equipment including accessories or spare parts or both of such equipment for personal use 5% – 88 578. 90 or any other Chapter Assistive devices, rehabilitation aids and other goods for disabled, specified in List 30 Nil 76[578A. Any Chapter Raw materials, parts or accessories for the manufacture of Cochlear Implants Nil – 9] 579. 90 or any other Chapter Survey (DGPS) instruments, 3D modeling software for ore body simulation cum mine planning and exploration (geophysics and geochemistry) equipment required for su
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
) Acrylic colour concentrate; (v) Acrylic marking paint; and (vi) Polytan in powder or granule form Nil – 93 590. 95 Requisites for games and sports Nil – 94 591. 9503 Parts of electronic toys for the manufacture of electronic toys, namely, parts of electric trains, including tracks, signals and other accessories therefor 5% – 9 592. 9503 Parts of electronic toys for the manufacture of electronic toys, other than those of reduced size ( scale ) model assembly kits, whether or not working models, other construction sets and constructional toys, toys representing animals or non-human creatures, toy musical instruments and apparatus, other toys put up in sets or outfits, other toys and models incorporating a motor 5% – 9 593.9 9504 Parts of video games for the manufacture of video games 5% – 9 594. 9506 (i) Snow-skis and other snow-ski Equipment (ii) Water-skis, surf-boards, sailboards and other water-sport equipment Nil 78[594A. 9506 91 All goods 10% ] 595. 9608 Parts of writing instrum
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
d in States other than those specified in (a); or (c) a hydel power plant of a capacity of 350MW or more, located in the States of Jammu and Kashmir, Sikkim, Arunachal Pradesh, Assam, Meghalaya, Manipur, Mizoram, Nagaland and Tripura; or (d) a hydel power plant of a capacity of 500MW or more, located in States other than those specified in clause I Nil – 95 599. 9801 Goods required for the expansion of Mega Power projects, namely, Vindhyachal STPP Stage -V (Expansion Unit)- 500 MW (NTPC Ltd.) and UNOSUGEN CCPP, Gujarat (An expansion unit of Sugen CCPP of 1147.5 MW)- 382.5(1) (M/s. Torrent Power Ltd.), so certified by an officer not below the rank of a Joint Secretary to the Government of India in the Ministry of Power before the 19th day of July, 2012. Explanation.- For the purposes of this entry, Mega Power Project means a project as defined in S. No 507 2.5% – 95 600. 9801 Goods required for- (a) Project for LNG Re-gasification Plant 5% (b) Aerial passenger ropeway project 5% 601.
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
ions starting with unloading of LNG from specialized vessels, their subsequent transfer to LNG storage tanks and finishing with re-gasification of the LNG before feeding the natural gas to the Ratnagiri Gas and Power Private Limited for the purpose of generating power at their power project at Dabhol Nil – 97 605. 9801 All items of equipment for National Automotive Testing and Research and Development Infrastructure Project (NATRIP) Nil – 98 606. 9801 Goods required for installation of mechanized handling systems and pallet racking systems in mandis and warehouses for food grains, sugar and horticultural produce 5% 607. 9804 The following goods, imported for personal use, namely: – (a) the life saving drugs or medicines (including diagnostic test kits) specified in List 4; Nil (b) other life saving drugs or medicines Nil – 16 26[607A 9804 Lifesaving drugs/medicines for personal use, supplied free of cost by overseas supplier Nil Nil 104] 608. 9804 All Goods intended for personal use,
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
b) PU or nylon grip sheets for hockey sticks (c) Butyl bladders for inflatable balls (d) Willow clefts, ashwood or beechwood (e) Cork bottoms (f) PVC/Synthetic Rubber bladder for inflatable balls (g) Manau cane (h) Table tennis rubber (i) Table tennis bat handles (j) Table tennis blade (k) TPU/PU leather cloth or TPU/PU laminated with cotton, for inflatable balls (l) Extra tec (cricket bat facing tape); (m) Resin hardener TTP-33S and release paper for composite hockey sticks; (n) Table tennis glue; (o) Evazote foam for protective equipments e.g. leg guards, thigh guards; (p) plywood for carrom board (q) PVC leather cloth for inflatable balls or sports gloves (r) Latex foam for shin guard or goal keeper gloves or other sports gloves (s) PEVA/EVA foil for shin guard or sports gloves (t) Stitching thread for inflatable balls or sports gloves (u) Printing ink for inflatable balls or sports gloves Nil – 101 Provided that nothing contained in this notification shall apply to – a) the goods s
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
the First Schedule to the Customs Tariff Act, 1975 (51 of 1975) read with any other notifications issued under sub-section (1) of section 25 of the Customs Act, 1962 (52 of 1962), for the time being in force. (b) – appearing in column (5) means Integrated Goods and Services Tax leviable on the goods as per the Integrated Goods and Services Tax Act, 2017 (13 of 2017) read with any other notifications issued under the said Act, for the time being in force. ANNEXURE Condition No. Condition 1. The rate of duty specified in column (4) shall apply to such quantity of imports for which an importer holds a Tariff Rate Quota Allocation Certificate issued by the EXIM Facilitation Committee in the Directorate General Of Foreign Trade in accordance with the procedure as may be specified by the EXIM Facilitation Committee in the Directorate General of Foreign Trade from time to time through a Public Notice. 2. If the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Ass
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
e Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, on production of a certificate from the Goods and Services Tax authorities having jurisdiction over such sugar factory within a period of three months from the date of import of such raw sugar that the entire quantity of imported raw sugar has been refined; and (iii) in the event of his failure to comply with the above conditions, the importer shall be liable to pay, in respect of such quantity of the raw sugar as is not proven to have been refined, an amount equal to the difference between the duty leviable on such quantity but for the exemption contained herein. 5. If the importer produces before the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a proof to show that the contract for import of such sugar is duly registered with the Agricultural and processed food Products Export Development Authority (APEDA). 6. If the importer, at the time of i
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
dure, as may be specified by the Directorate General of Foreign Trade by a Notification or Public Notice, as the case maybe. 8. If the importer, is registered with the Directorate of Vanaspati, vegetable Oils and Fats in the Department of Food and Public Distribution in the Government of India. 9. If the importer follows the procedure set out in the Customs (Import of Goods at Concessional Rate of Duty) Rules, 2017. 10. If,- (a) the goods are imported by an exporter of sea-food products for use in processing sea-food products for export and the said exporter is registered with the Marine Products Export Development Authority; (b)the total value of the goods imported shall not exceed 1% of the FOB value of exports of sea-food products exported during the preceding financial year; and (c) the importer produces a certificate from the Marine Products Export Development Authority, certifying the value of exports made during the financial year referred to in clause (b) above, and also the va
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
or an export manifest (EGM), as the case may be, in each leg of the voyage (v) such ships or vessels do not file any cargo related documentation under the Customs Act, 1962 (52 of 1962)with the Customs authorities, other than an import manifest (IGM) or an export manifest (EGM), as the case may be; (vi) the Master of the vessel or his authorised agent and the importer submit a declaration-cum-undertaking stating the quantity of bunker fuels required under this notification to the Assistant Commissioner of Customs or Deputy Commissioner of Customs, as the case may be, based on a document certifying the consumption rate of fuel issued by any classification society which is a member of the International Association of Classification Societies (IACS) and the distance proposed to be covered by the vessel during its voyage; (vii) the Master of the vessel or his authorised agent and the importer submit an undertaking to the Assistant Commissioner of Customs or Deputy Commissioner of Customs,
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
lopment Authority or by a road construction corporation under the control of the Government of a State or Union territory; (b) the importer, at the time of importation, furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that he shall use the imported goods exclusively for the construction of roads and that he shall not sell or otherwise dispose of the said goods, in any manner, for a period of five years from the date of their importation: Provided that the said Deputy Commissioner of Customs or the Assistant Commissioner of Customs, may allow the importer to sell or dispose of any of the imported goods on payment of customs duties at the rates applicable at the time of import but for this exemption, on the depreciated value of the goods to be calculated @ 5% on straight line method for each completed quarter starting from the date of importation of the said goods till the date of their sale subject
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
in each individual case, that the goods are life saving drugs or medicines; and (c) the importer produces the said certificate to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of clearance, or gives an undertaking as acceptable to the Deputy Commissioner or the Assistant Commissioner to furnish the said certificate within such period as may be specified by the Deputy Commissioner or the Assistant Commissioner, failing which to pay duty leviable thereon. Form Certificate No….………. of ………….. (year) Certified that the drug / medicine………………….(name of the drug / medicine) being imported by ………………………………. is a life saving drug / medicine and exemption from the payment of customs duty is recommended. Signature with date of Director General / Deputy Director General / Assistant Director
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
rtation. 18. If the importer produces a certificate of the Reference Standard and copies of documents to substantiate that the organization or institution from where the Reference Standard has been imported is approved by the World Health Organisation or International Organisation for Standards. 19. If,- (a) the importer produces a certificate from a duly authorised officer of the UNICEF to the effect that the said raw materials, intermediates and consumables are required for the manufacture of DTP vaccines; and (b) the importer, at the time of clearance, furnishes an undertaking, in each case, to the effect that the said raw materials, intermediates and consumables shall be used only for the manufacture of DTP vaccines. 20. If, at the time of importation, the importer produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a certificate from the Licensing Authority to the effect that specified quantity of such drugs and materials ar
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
clause (b) above and also the description, value and quantity of the item(s) already imported under this notification during the current financial year. 22. If , the importer at the time of import,- (a) furnishes in all cases a certificate to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Electronics and Information Technology (MeitY) recommending the grant of the exemption and the said officer certifies that the goods are required for the specified purpose; and (b) furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that,- (i) he shall use the imported goods for the purpose specified; and (ii) in case he fails to comply with item (i), he shall pay an amount equal to the difference between the duty leviable on the imported goods but for the exemption
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
goods but for the exemption under this notification and that already paid at the time of importation. 25. If, imported for the manufacture of Copper – T contraceptives. 26. If, – (i) imported for servicing, repair or maintenance of aircraft, which is used for operating scheduled air transport service or the scheduled air cargo service, as the case may be; or (ii) the parts are brought into India for servicing, repair or maintenance of an aircraft mentioned in clause (ii) of 2[Condition No. 79] Explanation.- The expressions scheduled air transport service and scheduled air cargo service shall have the meanings respectively assigned to them in Condition No. 3[79] 27. If,- (i)imported for servicing, repair or maintenance of aircraft imported or procured by Aero Club of India; or (ii)imported for servicing, repair or maintenance of aircraft, which are used for flying training purposes or for operating non-scheduled (passenger) service or non-scheduled (charter) services; (iii)imported for
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
or leather garments, for use in the manufacture of textile garments or leather garments for export by that manufacturer directly or through a merchant exporter, as the case may be, and that the said manufacturer or merchant-exporter is registered with the Apparel Export Promotion Council or Indian Silk Promotion Council or Council for Leather Exports, or as the case may be, Handloom Export Promotion Council: and (aa) the entitlement certificate issued by respective export promotion councils shall carry the name of supporting manufacturers along with the name of the merchant- exporter in case the goods are exported by a merchant exporter. (b) the total value of goods imported shall not exceed 5 percent of the FOC value of textile garments (other than handloom garments) or 3 percent of the FOB value of textile garments (other than handloom garments) or leather garments, as the case may be, or 5 percent of the (c) FOB Value of handloom garments exported during the preceding financial year
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
ion to the export product, the Commissioner of Customs, for reasons to be recorded in writing, orders drawal of sample at the time of export to verify such use. 29. If,- (a) the pulp of wood is imported for the manufacture of newsprint, that is to say, paper intended for the printing of newspapers, books and periodicals; and (b) the newsprint manufactured in terms of (a) above is supplied to a newspaper. Explanation.- For the purpose of this condition, newspaper means a newspaper registered by the Registrar of Newspapers for India under the provisions of the Press and Registration of Books Act, 1867 (25 of 1867). 30. If,- (a) The importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, that such imported goods will be used for the purpose specified and in the event of his failure to comply with this condition, he shall be liable to pay, in respect of such quantity of the said goods as is not proved to have bee
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
e of said goods for export by that manufacturer and the said manufacturer is registered with the Council for Leather Exports; (b) The total value of goods imported 5[shall not exceed 5%] of the FOB value of leather footwear or synthetic footwear or other leather products, exported during the preceding financial year; (c) The importer produces a certificate from the Council for Leather Exports, certifying the value of exports made during the financial year mentioned in sub-condition (b), and also the value and quantity of goods already imported under this notification during the current financial year. 33. If,- (a) the goods are imported by a manufacturer of handloom made ups or cotton made-ups or man-made made ups for use in the manufacture of said goods for export by that manufacturer and the said manufacturer is registered with the handloom Export Promotion Council or Cotton Textile Export Promotion Council or Synthetic and Rayon Textile Export Promotion Council as the case may be; (
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
.; 35. If at the time of importation, the importer produces a certificate from an officer not below the rank of Director to the Government of India in the Marine Products Export Development Authority, in the Ministry of Commerce and Industry, Government of India to the effect that the imported goods are for use in monofilament long line system intended to be used for tuna fishing. 36. If, – (a) the total value of goods imported shall not exceed 1 % of the FOB value of exports of carpets during the preceding financial year; (b) the importer produces a Certificate from Carpet Export Promotion council certifying the value of exports made during the preceding financial year, mentioned in condition(a), and also the value and quantity of goods already imported under this notification during the current financial year. 37. If at the time of importation, the importer,- (1) in all cases excluding the case of the goods at item No. 9 of List 9, produces a valid registration-cum-membership certifi
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
sistant Commissioner of State tax, as the case may be, having jurisdiction over the factory manufacturing the goods, to the effect that the said goods have been used for the aforesaid purpose; and (d) he shall pay, in the event of his failure to comply with the conditions above, an amount equal to the difference between the duty leviable on the imported goods but for the exemption under this notification and that already paid at the time of importation. 38. If the importer produces a certificate from an officer not below the rank of a Joint Director in the Ministry of Information Technology, Government of India, mentioning the technical specifications, description and quantity of the moulds, tools and dies and certifying that they are required for the manufacture of electronic parts and recommending grant of exemption. 39. If the said coins are imported with the approval of the Reserve Bank of India and are utilised for disbursement by the Scheduled bank in accordance with the regulati
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
g company or the laboratory attached to it, giving detailed precious metal content in the dore bar; (d) the gold dore bars are imported by the actual user for the purpose of refining and manufacture of standard gold bars of purity 99.5% and above; and (e) the silver dore bars are imported by the actual user for the purpose of refining and manufacture of silver bars of purity 99.9% and above. 41. If,- 1. (a) the duty is paid in convertible foreign currency; (b) the quantity of import does not exceed ten kilograms of gold and one hundred kilograms of silver per eligible passenger; and 2. the gold or silver is,- (a)carried by the eligible passenger at the time of his arrival in India, or (b) the total quantity of gold under items (i) and (ii) of Sr. No. 356 does not exceed one kilogram and the quantity of silver under Sr. No. 357 does not exceed ten kilograms per eligible passenger; and (c ) is taken delivery of from a customs bonded warehouse of the State Bank of India or the Minerals an
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
ort visits 42. If,- (1) zinc metal is imported within one year of the date of export of zinc concentrate out of India; and (2) sufficient evidence exists to establish that the zinc metal, which is imported has in fact been obtained out of toll smelting or toll processing of zinc concentrate exported out of India. Explanation.- On the imports referred to in condition (1) above, the duty shall be leviable as if the value of the said metal were equal to the aggregate of- (i) the toll smelting or toll processing costs, as the case may be, that is to say,- (a) labour charges; (b) cost of materials (other than the cost of goods exported out of India) used in such toll smelting or toll processing; and (c) any other charges which are payable in connection with the toll smelting or toll processing abroad; and (ii) the insurance and freight charges, both ways. 43. If,- (1) the dies for drawing metal, acquired in exchange, are imported within one year of the date of exportation of similar dies ou
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
t the power transmission project has been approved and an officer not below the rank of the Deputy Secretary to the Government of India in the Ministry of Power recommends, in each case, the grant of the aforesaid exemption to the goods for such project; (b) in other cases, an officer not below the rank of the Chief Engineer of the concerned Power Transmission Board or Corporation in a State certifies that such power transmission project has been approved and an officer not below the rank of the Secretary in a State Government concerned dealing with the subject of power or electricity recommends, in each case, the grant of the aforesaid exemption to the goods for such project; (ii) in all cases, the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that the said goods shall be used for the purpose specified above and in the event of his failure to use the goods for power transmission, he s
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
f goods in accordance with the provisions of section 65 of the Customs Act, 1962 (52 of 1962); and (b) a certificate is produced in each case to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, from a duly authorised officer of the Assistant Commissioner of Customs, as the case may be, from a duly authorised officer of the Directorate General of Hydrocarbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the goods are required for the purposes of off-shore oil exploration or exploitation. 48. If,- (a) the goods are imported by,- (i) the Oil and Natural Gas Corporation or Oil India Limited (hereinafter referred to as the licensee ) or a sub-contractor of the licensee and in each case in connection with petroleum operations to be undertaken under petroleum exploration licenses or mining leases, as the case may be, granted by the Government of India or any State Government on nomination basis; or (ii) a
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
ctober, 2015 in terms of the Marginal Field Policy, as the case may be; (b) where the importer,- (i) is a licensee, he produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation, the following, namely, a certificate from a duly authorised officer of the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for petroleum operations referred to in sub-clause (i) of clause (a) and have been imported under the licences referred to in that sub-clause; (ii) is a contractor, he produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of importation, the following, namely:- (1) a certificate from a duly authorised officer of the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the im
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
of importation, the following, namely:- (i) a certificate from a duly authorised officer of the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the imported goods are required for :- (1) petroleum operations referred to in sub-clause (i) of clause (a) and have been imported under the licenses or mining leases, as the case may be, referred to in that sub-clause and containing the name of such sub-contractor, or (2) petroleum operations referred to in sub-clause (ii) of clause (a) and have been imported under the contract referred to in that sub-clause and containing, the name of such sub-contractor, or (3) petroleum operations or coal bed methane operations, as the case may be, referred to in sub-clause (iii) of clause (a) and have been imported under a contract signed under the New Exploration Licensing Policy or the Coal Bed Methane Policy or the Marginal Field Policy, as the case may be, and containing the nam
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
anies and a Foreign Company or Companies, that no foreign exchange remittance is made for the import of such goods undertaken by the sub-contractor on behalf of the Foreign Company or Companies: Provided that nothing contained in this sub-clause shall apply if such sub-contractor is an Indian Company or Companies; (d) where the goods so imported by the licensee or a sub-contractor of the licensee, or the contractor or a sub-contractor of the contractor are sought to be transferred, the importer produces to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time of such transfer, the following, namely:- (1) a certificate from a duly authorised officer of the Directorate General of Hydro Carbons in the Ministry of Petroleum and Natural Gas, Government of India, to the effect that the said goods may be transferred in the name of another sub-contractor of the licensee or another licensee or a sub-contractor of such licensee, or another s
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
exploration license or mining lease, as the case may be, granted by the Government of India or any State Government on nomination basis, that no foreign exchange remittance is made for the transfer of such goods undertaken by the transferee on behalf of the licensee or lessee, as the case may be; (II) in the case of a contract entered into by the Government of India and a Foreign Company or Companies or, the Government of India and a consortium of an Indian Company or Companies and a Foreign Company or Companies, that no foreign exchange remittance is made for the transfer of such goods undertaken by the transferee on behalf of the Foreign Company or Companies, as the case may be: Provided that nothing contained in this sub-clause shall apply if such transferee is an Indian Company or Companies. (e) where the goods so imported are sought to be disposed of, the importer or the transferee, as the case may be, may pay the duty of customs which would have been payable but for the exemption
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
for each quarter in the third year at the rate of 2.5 per cent.; and (iv) for each quarter in the fourth year and subsequent years at the rate of 2 per cent., subject to the maximum of 70 per cent. 49. If the importer at the time of importation,- (a) furnishes in all cases a certificate to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, from an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of New and Renewable Energy (MNRE) recommending the grant of this exemption and in the case of the goods at (2) to (5), the said officer certifies that the goods are required for the specified purposes; and officer certifies that the goods are required for the specified purposes; and (b) furnishes an undertaking to the said Deputy Commissioner or Assistant Commissioner to the effect that,- (i)in the case of wind operated electricity generators upto 30 KW or wind operated battery chargers upto 30 KW, he sha
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
e required for the aforesaid projects, by an officer not below the rank of a Deputy Secretary in the Ministry of Environment and Forests. 51. 1) If an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Fertilizers,- (i) certifies that the scheme for renovation or modernization as the case may be, of the fertilizer plant has been granted techno-economic clearance by the said Department; (ii) recommends, in each case, the grant of exemption under this notification to,- (a)Machinery, instruments, apparatus and appliances, as well as components (whether finished or not) or raw materials for the manufacture of aforesaid items and their components, required for renovation or modernization of a fertilizer plant; and (b)spare parts, other raw materials (including semi-finished material) or consumable stores, essential for maintenance of the fertilizer plant mentioned above (hereinafter referred to as the said goods) for such scheme; and (iii)certif
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
vironment and Forests, to the effect that the imported kits or parts thereof are required for the conversion of motor-spirit or diesel driven vehicles into Compressed Natural Gas driven vehicles, or Propane driven vehicles, or Liquefied Petroleum Gas driven vehicles, as the case may be. 53. If,- (i) in the case of a power plant (except a nuclear power plant),- (a) in the case of Central Power Sector Undertakings, the Chairman of the concerned Undertaking or an officer authorized by him certifies that the scheme for renovation or modernization as the case may be, of such power plant, has been approved and an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of Power recommends, in each case, the grant of the aforesaid exemption to the goods for such scheme; (b) in other cases, an officer not below the rank of the Chief Engineer of the concerned State Electricity Board or State Power Utility certifies that the scheme for renovation or modernizati
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
he shall pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation. 54. If,- (a) in the case of small hydel power generation plants upto 3 MW station capacity, an officer not below the rank of a Deputy Secretary to the Government of India in the Ministry of New and Renewable Energy (MNRE) certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture and supply of machinery and equipment to the said hydel power generation plant and recommends the grant of this exemption to the imported goods; (b) in the case of nuclear power generation plant, an officer not below the rank of a Deputy Secretary to the Government of India in the Department of Atomic Energy certifies the quantity, description and technical specifications of raw materials and parts required to be imported for the manufacture
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
orted for the manufacture and supply of machinery and equipment to the said power generation plant and an officer not below the rank of a Secretary in the State Government concerned dealing with the subject of power or electricity recommends, in each case, the grant of the aforesaid exemption to the goods for such scheme; and (iii) in all cases, the importer furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that the imported goods shall be used for the purpose specified above and in the event of his failure to use the goods for the purpose specified, he shall pay an amount equal to the difference between the duty leviable on the said imported goods but for the exemption under this notification and that already paid at the time of importation. 55. If imported by a person licensed by the Department of Telecommunications of the Government of India for the purpose of providing basic telephone service,
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
ion shall be applicable to that portion of C.I.F. value of the specified cameras, lenses and other goods, which does not exceed one lakh rupees; and (iii) if the importer gives an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, at the time and place of importation to the effect that the said goods shall remain in his possession, control and use and shall not be sold or parted with for a period of two years from the date of importation. 59. (i) If the importer produces a certificate from an officer not below the rank of a Deputy Principal Information Officer in the Press Information Bureau in the Ministry of Information and Broadcasting to the effect that the importer is an accredited journalist, and that the importer has not availed, on any occasion in the previous two years, exemption under this notification or the notification of the Government of India in the Ministry of Finance (Department of Revenue), No. 12/2012- Cus
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
e tax or the Assistant Commissioner of State tax, as the case may be, for the units registered with respective Goods and Services Tax , and from an independent Chartered Engineer, for the units not registered with the Goods and Services Tax is produced before the Assistant Commissioner of Customs or the Deputy Commissioner of Customs, as the case may be, at the Port of importation; and (c) the goods imported are not transferred or sold for a period of seven years from the date of installation; (ii) If, – (a) the goods are imported for use in the manufacture of commodities; (b) the total value of goods imported does not exceed 25 per cent. of the FOB value of exports made during the preceding financial year; (c) the importer produces a certificate from the Joint Director General of Foreign Trade in the Ministry of Commerce of the Government of India, certifying the value of exports made during the financial year mentioned in clause (b) above, and also the value and quantity of goods alr
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
porter produces a certificate from the Joint Director General of Foreign Trade in the Ministry of Commerce in the Government of India, certifying the value of exports made during the financial year mentioned in clause (b) above, and also the value and quantity of goods already imported under this notification during the current financial year; (d) the imported goods are installed in the said Research and Development wing of the importer within six months from the date of importation and certificate from the jurisdictional Deputy Commissioner of Central tax or the Assistant Commissioner of Central tax or the Deputy Commissioner of State tax or the Assistant Commissioner of State tax, as the case may be, for the units registered under the respective Goods and Services Tax Acts and from an independent Chartered Engineer, for the units not registered with the Goods and Services Tax is produced before the Assistant Commissioner of Customs or deputy Commissioner of customs, as the case may b
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
he case may be, at the time of importation to the effect that – (a) the said spares shall be used for the purpose specified above; and (b) he shall pay on demand in the event of his failure to comply with (a) above an amount equal to the difference between the duty leviable on the said spares but for the exemption under this notification and that already paid at the time of importation. 63. If,- (1) the spinnerettes acquired in exchange, are imported, within one year of the date of exportation of spinnerettes out of India; and (2) no drawback of duty has been paid on the occasion of their export. Explanation.- On the imports referred to in condition (1) above, the duty would be leviable as if the value of the said spinnerettes were equal to- (i) the cost of such exchange, that is to say, the aggregate of – (a) labour charges; (b) price charged for that quantity of gold, platinum and rhodium, if any, which is in excess of the respective quantity of gold, platinum or rhodium contained in
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
harges, both ways. 65. If the importer produces a certificate from an officer not below the rank of a Joint Secretary to the Government of India in the Ministry of Home Affairs that the imported goods are required for call interception and monitoring, to be used by authorized security agencies. 66. If an accredited representative of the foreign film unit or the television team executes a bond in such form and with such surety as may be acceptable to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, binding himself to pay on demand an amount equal to the duty leviable on such equipment and cameras if the same are not placed under customs control for re-export within a period of three months or such extended period as the said Deputy Commissioner or the Assistant Commissioner may permit, after clearance for home consumption. 67. If, – (a) the duties of customs leviable on the specified equipment, raw films and tapes had been paid at the time
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
total value of the parts imported under this exemption does not exceed one thousand rupees; (c) the importer, i.e. the Licensed amateur radio operator, at the time of clearance, produces a certificate from an officer not below the rank of an Assistant Wireless Adviser to the Government of India in the Ministry of Communications to the effect that the wireless apparatus, accessories and parts in respect of which this exemption is claimed are within the value limit specified above, and also recommending the grant of this exemption. Explanation.- licensed amateur radio operator means a person duly authorised under the Indian Wireless Telegraphs (Amateur Service) Rules, 1978, made under sections 4 and 7 of the Indian Telegraph Act, 1885 (13 of 1885). 69. If the importer, at the time of importation furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that,- (a) the imported goods shall be used for the spec
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
imported by a newspaper establishment registered with the Registrar of Newspapers for India appointed under section 19A of the Press and Registration of Books Act, 1867 (25 of 1867); and (b) the importer at the time of import produces before the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, – (1) a certificate issued by the Registrar of Newspapers for India recommending the grant of exemption under this notification; and (2) an undertaking to the effect that the imported goods shall remain in his possession, control and use and shall not be sold or parted with for a period of five years from the date of importation and in case the said goods are sold thereafter, the sale shall be subject to the permission granted by the Registrar of Newspapers for India. 72. If the importer, at the time of import, is registered with the Indian Renewable Energy Development Agency or any State Nodal Agency notified for the purpose by the Ministry of New and
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
anufacture or servicing of aero planes, gliders, helicopters or simulators of aircraft. Explanation. – Parts of aero planes, gliders, helicopters or simulators of aircraft shall include engines, engine parts, wireless transmission apparatus, wireless receivers, iron and steel washers and screws, ball and roller bearings and other parts. 75. If,- (A) imported by units approved by Director General of Civil Aviation in the Ministry of Civil Aviation, for maintenance, repair, or overhauling of- (a) aircraft registered in India; or (b) aircraft not registered in India, which are brought into India for the purpose of flight to or across India, or for the purpose of maintenance, repair or overhauling and which are intended to be removed from India within six months or for such periods as extended by the Director General of Civil Aviation, as the case may be; or (c) aircraft components or parts, including engines of aircrafts; (B) the importer submits documents duly certified by the Director G
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
aforesaid purposes, within a period of three years from the date of importation thereof or within such extended period as that Commissioner, on being satisfied that there is sufficient cause for not installing, using or consuming as the case may be, for the aforesaid purposes within the said period, allow. 76. (a) If, imported for maintenance, repair or overhauling of aircraft, not registered or intended to be registered in India, but to be removed from India within six months or as extended by the Director General of Civil Aviation in the Ministry of Civil Aviation; and (b) carries passengers in the flight at the beginning and end of the stay period in India, but undertakes no commercial flights during the stay period. 77. If the components or parts, including engines, of aircraft of heading 8802, is imported for maintenance, repair or overhauling by units approved by the Director General of Civil Aviation in the Ministry of Civil Aviation for the said purpose and such components or
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
hat the ground equipment, covered under item (c) of column (3) of S.No.539 of the Table, imported for testing the satellites or pay-loads shall be re-exported within a period of six months from the date of their importation or such extended period as the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, may allow, and in the event of failure to comply with the same, he shall pay on demand an amount equal to the difference between the duty leviable on such goods but for the exemption under this notification and that already paid at the time of importation. 79. 75. If, – (i) imported by an operator or on behalf of the operator, for operating scheduled air transport service or scheduled air cargo service, and such aircraft is used for operating the scheduled air transport service or the scheduled air cargo service, as the case may be; or (ii) the said aircraft is not registered or not intended to be registered in India, and brought into India for
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
rted by,- (i) the Aero Club of India, New Delhi, recognized as a National Sports Federation by Ministry of Youth Affairs and Sports, Government of India; or (ii) a Flying Training Institute approved by the competent authority in the Ministry of Civil Aviation; and (b) the importer has been granted approval by the competent authority in the Ministry of Civil Aviation to import aircraft for use in imparting training; and (c) the importer furnishes an undertaking to the Deputy Commissioner of Customs or Assistant Commissioner of Customs, as the case may be, at the time of importation that:- a. the said aircraft shall be used for the specified purpose only and he shall pay on demand, in the event of his failure to use the imported aircraft for the specified purpose, an amount equal to the duty payable on the said aircraft but for the exemption under this notification; b. the aircraft imported under this concession shall not be sold/transferred to an entity other than a flying training inst
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
undertaking to the Deputy Commissioner of Customs or Assistant Commissioner of Customs, as the case may be, at the time of importation that:- a. the said aircraft shall be used only for providing non- scheduled (passenger) services or non-scheduled (charter) services, as the case may be; and b. he shall pay on demand, in the event of his failure to use the imported aircraft for the specified purpose, an amount equal to the duty payable on the said aircraft but for the exemption under this notification. Explanation.- (1) for the purposes of this entry,- (a) operator means a person, organization, or enterprise engaged in or offering to engage in aircraft operation; (b) non-scheduled (passenger) services means air transport services other than Scheduled (passenger) air transport services as defined in rule 3 of the Aircraft Rules 1937. (c) non-scheduled (charter) services mean services provided by a non-scheduled (charter) air transport operator , for charter or hire of an aircraft to an
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
ecutes a bond, in such form and for such sum as may be specified by the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, binding himself to pay that sum if the re-export does not take place within the period specified under condition (b) above. 83. If,- (a) the importer maintains a proper account of import , use and consumption of the specified goods imported for the purpose of repairs of ocean going vessels and submits such account periodically to the commissioner of customs in such form and in such manner as may be specified by the said commissioner; (b) the importer, by the execution of bond, in such form and for such sum as may be specified by the Commissioner of Customs, binds himself to pay on demand an amount equal to the duty leviable on the spares and consumables, as are not proved to the satisfaction of the said commissioner to have been used or otherwise consumed for the aforesaid purpose, within a period of one year from the date
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
lvage ships ; and (iv) Oil rigs , drilling ships and jack-up rigs. 84. If the vessels and other floating structures are intended to be broken up after their importation, the importer shall present a fresh bill of entry to the Commissioner of Customs, and thereupon such goods shall be chargeable with the duty which would be payable on such goods as if they were entered for home consumption, under section 46 of the Customs Act, 1962 (52 of 1962), on the date of the presentation of such fresh bill of entry, for the purposes of break-up of such goods. 85. If any of the goods manufactured from the imported raw materials and parts are subsequently intended to be broken up, a fresh bill of entry in respect of such manufactured goods shall be presented to the Commissioner of Customs and thereupon these goods shall be chargeable with the duty which would be payable as if such manufactured goods had been imported and entered for home consumption, under section 46 of the Customs Act, 1962 (52 of
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
eneral of Health Services of the Government of India or the Ministry of Health and Family Welfare in the Government of India, or from the State Government, the Union terrritory Administration or the Local Authority running or controlling that hospital, as the case may be, to the effect that the said hospital falls in any of the categories specified at (a) above; and (c) the head of the hospital certifies in each case that the hospital equipment is meant for use in the hospital and is essential for running or maintenance of the hospital. Explanation.- Hospital includes any Institution, Centre, Trust, Society, Association, Laboratory, Clinic and Maternity Home, which renders medical, surgical or diagnostic treatment. 88. If the importer at the time of importation, – (a) produces a certificate from the Director General or Deputy Director General or Assistant Director General, Health Services, New Delhi, in each case, in the Form below; or (b) furnishes an undertaking acceptable to the Dep
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
er of Customs, as the case may be, a certificate from an officer not below the rank of Joint Secretary to the Government of India in the Ministry of Mines to the effect that the said goods are required for the specified purpose. 90. If,- (a) where the importer is the Government of India or a person authorised by that Government, or the goods are shipped on the order of a Department of that Government and are appropriated under such order at the time of shipment, for use in anti-smuggling operations, he produces, at the time of importation, a certificate from the Under Secretary to the Government of India in the Department of Revenue to the effect that the said goods are intended for the aforesaid use; (b) where the importer is a Police Force of a State or a Union territory or the Central Reserve Police Force, the National Security Guard or the Special Protection Group and the said goods are imported for bomb detection or disposal purposes, he produces, at the time of importation, a cer
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
faces of the Department of Youth Affairs and Sports, Government of India; (b) the importer, at the time of import – (1) produces before the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, a certificate from an officer not below the rank of a Deputy Secretary to the Government of India in the said Department certifying that the import of the said tracks and surfaces is under the Scheme for Laying Synthetic Tracks and Artificial Surfaces and also recommending the grant of the exemption; and (2) gives an undertaking to the effect that the equipment imported for installation of the said tracks and surfaces shall be re-exported within a period of six months from the date of importation, and in the event of failure to comply with the same he shall pay on demand an amount equal to the difference between the duty leviable on such goods but for the exemption under this notification and that already paid at the time of importation. 93. If,- (a) the go
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
orts are required to be used in a national or international championship or competition to be held in India or abroad. 95. If an officer not below the rank of a Joint Secretary to the Government of India in the Ministry of Power certifies that:- (i) the power purchasing State has constituted the Regulatory Commission with full powers to fix tariffs; (ii) the power purchasing states shall undertake to carry out distribution reforms as laid down by Ministry of Power. 37[(a) In case of imports for a project for which certificate regarding Mega Power Project status issued by an officer not below the rank of Joint Secretary to the Government of India in the Ministry of Power is provisional, the importer furnishes a security in the form of a Fixed Deposit Receipt or Bank Guarantee from any Scheduled Bank for a term of one hundred and twenty-six months in the name of the President of India for an amount equal to the duty of customs payable on such imports but for this exemption, to the Deputy
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
e, description and specifications of the imported goods are certified by the Chief Executive Officer of such project. 96. (a) In the case of imports by the constituent units of the Department of Atomic Energy, the quantity, total value, description and specifications of the imported goods are certified by an officer not below the rank of a Joint Secretary to the Government of India in the Department of Atomic Energy. (b) In the case of imports by a Central Public Sector Undertaking, the quantity, total value, description and specifications of the imported goods are certified by the Chairman and Managing Director of the said Central Public Sector Undertaking; 97. The LNG facility is certified by an officer not below the rank of a Joint Secretary to the Government of India in the Ministry of Power as being an integral part of the said power project of M/s Ratnagiri Gas and Power Private Limited at Dabhol. 98. If the importer, at the time of import, produces to the Deputy Commissioner of
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
the concerned Authority in the concerned State Government. 101. If,- (a) the goods are imported by a manufacturer, for use in the manufacture of sports goods for export by that manufacturer and the manufacturer is registered with the Sports Goods Export Promotion Council ; (b) the total value of specified goods imported in a year shall not exceed 3 % of the FOB value of sports goods exported by the manufacturer during the preceding financial year; (c) the importer produces a certificate from the Sports Goods Export Promotion Council certifying the value and quantity of exports made during the preceding financial year mentioned in sub-condition (b); and also the value and quantity of goods already imported under this notification during the current financial year. 7[102 The importer, by the execution of bond, in such form and for such sum as may be specified by the Commissioner of Customs, binds himself,- (i) to pay Integrated tax leviable under section 5(1) of the IGST Act, 2017 on su
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
specifications) are supplied by United Nations International Children's Emergency Fund (UNICEF), Red Cross or an international organisation and are required for Central Government/State Government sponsored immunisation programmes; and (2) furnishes an undertaking to the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, to the effect that the imported goods shall be used for the above purpose and he shall pay, on demand, in the event of his failure to use the imported goods for the above purpose, an amount equal to the difference between the duty leviable on such quantity of the imported goods but for the exemption under this notification;] 26[104 If the importer at the time of import- (a) the goods are imported by an individual for personal use; (b) it is certified in the Form below, by the Director General or Deputy Director General or Assistant Director General, Health Services, New Delhi, Director of Health Services of the State Govern
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
llip;….…….……. (quantity) for treatment period ………(months) and exemption from the payment of IGST is recommended. Signature with date of Director General / Deputy Director General / Assistant Director General, Health Services, New Delhi or Director of Health Services or District Medical Officer/Civil Surgeon] List 1 (See Sr.No.104 of the Table) 1) Breadcrumbs 2) Batter 3) Flavouring Oil 4) Food Colours 5) Monosodium Glutamate 6) Flavouring extracts, and sauces 7) Pre-formed HIPS Containers 8) Polyurethane and Polystyrene containers meeting buyers requirements 9) Printed Plastic Pouches for Packing buyers brand 10) Food grade Phosphates 11) Food tenderizers 12) Food enzymes 13) Food marinates 14) Starch (Wheat/non-wheat)/Pre-gelatinized Starch 15) Sucrose 16) Sodium Chloride 17) Seasoning Salts/acids such as sodium carbonate, potassium hydrogen tartrate 18) Oleoresins/spice extract 19) Natural Edible gum 20) Anti-oxidants, BHT/EDTA/
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
mycin powder 20) Lincospectin (bulk drug lincomycin spectinomycin 1:2) 21) Maduramicin ammonium/haduramycin ammonium 22) Monensin granulated (coban premix) 23) Ovaprim gonadotropin releasing hormones (GnRH) analogue with domperidone 24) Pleuromutilin 25) Pregnant mare serum (PMSG) 26) Prostaglandin F2 alpha 27) Prostaglandin 28) Prostaglandins (PgF2 alpha) 29) Robenidin HCl 30) Salinomycin 12% 31) Tiamulin hydrogen fumarate 32) Tiamulin hydrochloride 33) Tylan premix 34) Tylosin tartarate/ tylosin phosphate 35) Vaccine for fish 36) Virginiamycin 37) 4-hexyl resorcinol List 3 (See S. No 166 of Table) 1) Amikacin 2) Amphotericin-B 3) Amrinone 4) Aprotinin 5) Baclofen 6) Bleomycin 7) Busulphan 8) BCG vaccine , Iopromide,Iotrolan 9) Chlorambucil 10) Chorionic Gonadotrophin 11) Clindamycin 12) Cyclophosphamide 13) Dactinomycin 14) Daunorubicin 15) Desferrioxamine 16) Dimercaprol 17) Disopyramide phosphate 18) Dopamine 19) Eptifibatide 20) Glucagon 21) Hydroxyurea 22) Isoprenaline 23) Isoflu
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
rinone Lactate 60) Methoxy Isobutile Isonitrile (MIBI) 61) Haemophilus Influenzae Type b Vaccine 62) Mycophenolate Sodium 63) Verteporfin 64) Daclizumab 65) Ganciclovir 66) Drotrecogin alfa (activated) 67) Eptacog alfa activated recombinant coagulation factor VIIa 68) Muromonab CD3 69) Japanese encephalitis vaccine 70) Valganciclovir 71) Low molecular weight heparin 72) Efavirenz 73) Emtricitabine 74) Azathioprine 75) Antinomycin D 76) Cytosine Arabinoside (Cytarabine) 77) Vinblastine Sulphate 78) Vincristine 79) Eurocollins Solution 80) Everolimus tablets/dispersible tablets 81) Poractant alfa 82) Troponin-I whole blood test kit 83) Blower/mister kit for beating heart surgery 84) Fluoro Enzyme Immunoassay Diagnostic kits 85) Tablet Telbivudine 86) Injection Exenatide 87) DTaP-IPV-Hib or PRP-T combined Vaccine 88) Pneumococcal-7 Valent Conjugate Vaccine (Diphtheria CRM197 Protein) 89) Injection Thyrotropin Alfa 90) Injection Omalizumab 91) Abatacept 92) Daptomycin 93) Entacevir 94) Fon
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
ormal Human Immunoglobulin 5) Anti-human lymophocyte immunoglobulin IV 6) Anti-human thymocyte immunoglobulin IV 7) Anti-Pertussis Normal Human Immunoglobulin 8) Anti-Plague serum 9) Anti-Pseudomonas Normal Human Immunoglobulin 10) Basiliximab 11) Beractant Intra-tracheal Suspension 12) Blood group sera 13) Botulinum Toxin Type A 14) Burn therapy dressing soaked in gel 15) Bovine Thrombin for in vitro test for diagnosis in Haemorrhagic disorders 16) Bovine Albumin 17) Bretyleum Tossylate 18) Calcium Disodium Edetate 19) Carmustine 20) Cesium Tubes 21) Calcium folinate 22) Cholestyramine 23) Christmas Factor Concentrate (Coagulation factor IX prothrombin complex concentrate) 24) Cobalt-60 25) Corticotrophin 26) Cyanamide 27) Diagnostic Agent for Detection of Hepatitis B Antigen 28) Diagnostic kits for detection of HIV antibodies 29) Diphtheria Antitoxin sera 30) Diazoxide 31) Edrophonium 32) Enzyme linked Immunoabsorbent Assay kits ELISA KITS 33) Epirubicin 34) Fibrinogen 35) Floxuridin
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
ormal Human plasma 66) Normal Human immunoglobulin 67) Nuclear magnetic resonance contrast agent 68) Normal Human serum Albumin 69) Penicillamine 70) Pentamidine 71) Penicillinase 72) Poliomyelitis vaccine (inactivated and live) 73) Potassium Aminobenzoate 74) Porcine Insulin Zinc Suspension 75) Prednimustine 76) Porcine and Bovine insulin 77) Purified Chick Embryo Cell Rabies Vaccine 78) Pyridostigmine 79) Pneumocystis carinii IF kits 80) Prostaglandin E 1 (PGE1) 81) Radio-immunoassay kit for hormones (T3, T4, TSH Insulin, Glucogen, Growth Hormone, Cortisol, L.H., FSH and Digoxin) 82) Radioisotope TI 201 83) (a) Rabbit brains thromboplastin for PT test (b) Reagent for PT tests (c) Human Thrombin for TT tests 84) Rabies immunoglobulin of equine origin 85) Sevoflurane 86) 20[Rocuronium Bromide] 87) Septopal beads and chains 88) Sodium Arsenate 89) Freeze Dried Form of Human Follicle Stimulating and Luteinising Hormones 90) Solution of Nucleotides and Nucliosides 91) Specific Desensitizi
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
vinyl chloride-vinyl acetate copolymer 10) UV resin 1 & 2/Ribbon matrix 11) Nylon-12 / Ether Ester Elastomer 12) Coloured Nylon 12/ Nylon 11/Ether Ester Elastomer 13) Elongated polyethylene tape 14) Polyester tape/Water blocking tape 15) Nylon thread/water swellable yarn 16) Polyethylene cord 17) Biaxily oriented nylon tape 18) Silica tube / rod, other than preform 19) Aramid Yarn 20) Impregnated Glass fibre reinforcement (Glass rovings) 21) Rip Cord 22) Nylon 11 23) Low smoke zero Halogen compound for sheathing 24) Glass yarn / Rovings 25) Complex high molecular weight resin in acrylate solution 26) Acrylated monomers 27) Photoinitiater 28) Tert Butyl perbenzoate 29) Zinc soap of long fatty acid mixture 30) Modified polypropylene 31) thylene acrylic acid (EAA)/Vinyl ester List 6 (See S.No.168 of the Table) 1) Glass yarn / Rovings 2) UV resin 3) Complex high molecular weight resin in acrylate solution 4) Acrylated monomers 5) Photoinitiater 6) Tert Butyl perbenzoate 7) Zinc soap o
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
n, Fluorine, Argon 7) Vaccum pumps of capacity upto 20 litres per minute 8) Quartz and Special glasses 9) Non linear crystals 10) Electro- optic and Acousto- optic switches 11) Special materials, namely, High purity gases, Kovar, Alumina and Zirconia fibres, Recrystallised Alumina Tubes, Optical polishing materials, Optical cleaning material, Dyes and Pitch for optical polishing 12) Optical filters List 8 (See S.No. 331 of the Table) PARTS, CONSUMABLES AND OTHER ITEMS 1) Leather, plastic, rubber coco board, masonite board or plastic board, heels with or without rubber/PVC top lift 2) Toe caps and counters for leather footwear 3) Insoles or midsoles and sheets therefor 4) Welts made from leather or plastic 5) Shoes eyelets 6) Felt sleeves 7) Heel tips 8) Unit soles with or without heels 9) Stamping wheels 10) Patterns for leather footwear 11) Plastic or nylon tipped hammers 12) Plastic, PVC or nylon lasts with or without steel hinges 13) Clicking boards for leather machinery 14) Harness
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
sulphated / oxidised / chlorinated cod oil or sulphonated / sulphated / oxidised / chlorinated neats foot oil or sulphonated / oxidised / chlorinated fish oil or mixtures thereof 33) Pigment finishes for leather 34) Aluminium tanning agents, oil tanning agents, zirconium tanning agents, basic chrome sulphate 35) Polishes, creams and similar preparations for footwear or leather 36) Casein, resin (other than acrylic resin) and polyurethane binders 37) Slip agents of heading 3208 38) Lacquer and lacquer emulsion of heading 3208 39) Preservatives of heading 2942 40) Synthetic fat liquors (with or without hydrocarbons), non-ionic fat liquors, and mixtures thereof 41) Fatty oil or pull up oil 42) Syntans 43) Solvent soluble dye Mordant Brown of Hue No.79 44) Solvent soluble dye Acid Brown of Hue Nos. 75, 76, 97, 98, 126, 127, 144, 159, 160, 161, 162, 165, 188, 191, 194, 196, 214, 237, 256, 265, 268, 270, 282, 290, 298, 303, 310, 321, 322, 349, 355, 358, 359, 360, 362, 365, 373, 387, 396, 40
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
Solvent soluble dye Direct Green of Hue No. 66 List 9 (See S. No. 331 of the Table) OTHER PARTS, CONSUMABLES AND ITEMS 1) Formulations containing either Thio Cyano Methyl Thio Benzothiazole (TCMTP) or Para Chloro Meta Cresol (PCMC) or both; Self basifying chrome tanning agents 2) Penetrators 3) Stamping foil in strips of width not exceeding 6 inches 4) Eyelets, hooks, rings, all type locks including magnetic locks, push clips, metal handle, key chain holder, corners, puller, fancy caps, clamps, decorative rivets, decorative fittings and logos, handle holders, studs, sockets, hinges, buckles, metal frames, tacks and washers 5) Buttons, press-fasteners and snap-fasteners falling under heading 9606 6) Magnetic buttons 7) Abrasive sheets falling under sub-heading 680520 8) Shanks and welts falling under headings 7326 and 6406 respectively 9) The following chemicals for the manufacture of leather chemicals :- I. Phenol II. Naphthalene III. Paraffin wax IV. Dicarboxylic acid and mixtures the
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
igh temperature application 9) 765 KV Polymer Long Rod Insulators 10) Emergency Restoration System (ERS) for extra-high voltage transmission Line 11) Overhead Optical Ground Wire (OPGW), including hardware and accessories such as Vibration Damper, Joint Box, Suspension and tenslon clamps 12) High Voltage DC Divider and CT 13) High Voltage DC Reactor 14) High TRV Circuit Breaker for High Voltage DC application 15) Protective Spark Gap and Damping Equipment for Thyristor Controlled Series Compensator (TCSC)/ Fixed Series Compensator (FSC) 16) Thyristor Controlled Series Compensator (TCSC)/ Fixed Series Compensator (FSC) MOV for Series Compensation 17) Optical Current Transformer 18) 400 KV Extra High Voltage Cables 19) Gas Insulated Switchgear equipment for 220 KV and above 20) Thermo Vision Camera 21) On-line Puncture insulator detector 22) Hot line Kits and Tools for transmission line live maintenance 23) Hot line washing equipment for insulators List 11 (See S.No. 399 of the Table) Te
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
merization equipment, including pre-crystalliser, crystalliser and rotary feeders (g) Process control equipment, including viscosity measuring equipment (Viscometer) and, Distributed control system (h) Atomic absorption spectrometer, X-ray fluorescence spectrometer (i) Extraction tower with accessories like centrifugal dehydrator and blower (j) Chip conveying system and accessories like blowers, filters and rotary and screw feeders (k) Solid State polymerization system including blowers and nitrogen plant (l) Crushing and melting system for caprolactum (m) V.K. Tube (n) Screw Feeder (o) Centrifugal dehydrator (p) Drying Tower (q) Circulating Blower (r) Fuel Oil Bowler 2) Machinery for synthetic fibre plant: (a) Spinning equipment, including manifold spinning beams, pre-heating ovens and finish applicators (b) Polymer transfer line, including extruder, color blender and continuous polymer filter (CPF); polymer valves (c) Draw-off equipment, including take-up equipment, thread cutters an
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
, refractometer, conductivity meter : 3) Machinery for synthetic filament yarn plant : (a) Spinning equipment, including manifold, spinning beams and pre-heating ovens (b) Polymer transfer line, including extruder, color blender and continuous polymer filter (CPF) (c) Take-up equipment, including take-up frames, oil application unit, godet rollers, yarn guides, thread cutters and aspirators, lace-up/suction gun, take-up and draw winders (d) Packing and automation equipment, including automatic doffers, automatic bobbin storage and handling system (e) Draw texturising machine, including creel, intermingling jets, ceramic guides, doffers (f) Textile laboratory equipment for yarn testing, including automatic tensile tester, projection microscope, denier skein reel, entanglement tester, denier auto count, dynafil, uster tester, online finish checking instrument 4) Other capital goods for synthetic fibre/yarn industry: (a) Spin draw winding machine (b) Spindles (c) Yarn guides (d) PSM Rings
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
l pick up analyzer (f) Automated titrator (g) Textile laboratory equipment for testing of fiber properties such as denier, tenacity, elongaton, spinning fault, UV value and microscope with fibre imaging system 8) Machinery for Viscose Rayon Filament Yarn/ Rayon Tyre Yarn: (a) Twin rolls press (b) Ageing Drum Hopper (c) Blowers and Fans for Alkali Cellulose Transport system (d) Slorry Pumps including VFDs (e) Automatic Pulp handling system (f) Simplex/Churn (g) Plate and Frame Filter Press (h) Viscose Pumps (Gear/Screw Pumps including VFDs) (i) Evaporator (j) Heat Exchager- Hastalloy Plate and Frame Type (k) Crystallizer (l) Vacuum System – Ejectors, Boosters, Vacuum Pump and Vacuum Filter (m) Auto bagging and weighing system (n) Sand Filters (o) Centrifugal Pumps including VFDs (p) Pot Spinning Machine (q) Spinning Pots and Pot Motors (r) Metering Gear Pumps for Viscose (s) Automatic cake wrapping system (t) Air Splicer for Knotting Yarn (u) Automation for Cone Weighing and Cone Doffin
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
removal system (xvi) Automatic bale handling system (xvii) Bale inspection system (xviii) Automatic candle filters for spin bath filtration (xix) Dry condensing system for low pressure vapour removal in evaporators, crystallisers and viscose deaerators (xx) Low temperature multi effect distillation (LT-MED) system and mechanical vapour compression for effluent treatment by water desalination process (xxi) Electrical protecting devices and relays falling under tariff item 8536 49 00 (xxii) Flame proof motors falling under tariff item 8536 90 90 (xxiii) Process monitoring and control equipment falling under tariff item 8538 10 10 (xxiv) Distributed control system falling under tariff item 8537 10 10 (xxv) Precision gear pumps for highly viscous polymers (xxvi) Hydraulic screen changing type continuous filters for viscous polymers (xxvii) Static mixers for high viscosity polymers (xxviii) High pressure stainless steel micro spinnerettes (less than 80 micron hole size) for high viscosity
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
colour fading/marking/drawing machine 11) Laser operated colour spraying machine for garments 12) Needle detector machine 13) Fusing machine 14) Fabric laying machine 15) Computerised cutting machine C. Machinery for manufacture of technical textiles, namely:- 1) Precision coating heads 2) Turret winder and unwinders 3) Coating equipment for scrim fabrics 4) Multi-colour roto gravure printing machine for coated fabrics 5) Printing equipment for sineage for coated or laminated fabrics 6) Grommet fixing machine 7) Ultra sonic, hot air and wedge RF/laser polymetric sealing machine 8) Weatherometer 9) Automatic thickness gauze 10) Puncture resistance 11) Twisting Machines 12) Material Handling system for Twisting Machines 13) Data capture system for Twisting Machines 14) Balancing Equipment for Cable Corder Spindle Motors 15) Shuttle-less looms 16) Reeds for weaving machines 17) Warp defects detection system 18) Parts for Airjet weaving machines 19) Parts for projectile weaving machines 2
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
mely:- 1) Automatic Hopper Feeder 2) Greasy Wool Opener 3) Tow-to-Top Converter 4) Automatic/Semi-Automatic Pump Press 5) Ring frame with 50 mm Ring or below PLC/Computer controlled 6) PLC/ Computer Controller Assembly Winding machine 7) PLC/ Computer controlled Two- for Twister/Three-for-one Twister 8) Twisting /covering machine for Lycra Yarn 9) Automatic cleaning machine for Heald, Reeds and drop wires. 10) Electric/ Electronic/ motorized beam trolley with Harness lifting arrangement. 11) Open Width scouring machine/Rope scouring machine 12) Damping unit for fabric conditioning 13) Automatic Weft straightener 14) Shearing machine 15) Continuous crabbing machine 16) Wollen ring frame 17) Fibre/Yarn/Fabric testing equipment namely, Fineness meter, Evenness Tester, Light Fastness Tester, Strength Tester, Length Measurement Tester, Crease Recovery Tester, Projection Microscope, Pilling and Abrasion Tester, Colour Comparator for instant observation of matched shades, Yarn friction and Ha
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
/elastane yarn attachment on ring frame for manufacturing core spun yarn 2) Single end warping machine 3) Single end sizing machine 4) Reaching-in machine 5) Humidification plant List 13 (See S. No. 409 of the Table) 1. All types of Refinery Process Units including distillation (CDU, VDU, Condensate Fractionator), thermal cracking (Delayed Coker, Visbreaker, Flexicoker), catalytic cracking (FCC, Hydrocracker), lube processing (Deasphalting, Dewaxing, Solvent Extraction), hydro- desulphurisation/hydrotreating (Naphtha, Diesel, VGO, ARDS, LC Fining, H. Oil), alkylation, isomerisation, catalytic reforming, treating (Merox, Amine), recovery (Propylene, Ethylene, Butane), synthesis (MTBE, TAME), gas concentration plant, bitumen blowing, sour water stripping and extraction (Pentane, Hexane, BTX). 2. All types of Hydrogen Generation, Recovery and Purification Plants, Sulphur Recovery Plants including Tail Gas Treatment Units, with associated components and equipments, including reactors (like
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
ms for LPG either supplied separately or as a whole, with component equipments, drivers, instrumentation and control systems, and auxiliaries. 5. All types of Water Handling and Treatment Systems, including sea water intake systems comprising of sea water band screens, Desilting systems for still basin, Sea Water filtration/Chlorination Systems, Desalination plants, Cooling Water Towers, Demineralization plants, Condensate Polishing Systems, Deaerators and Potable Water Systems, and all component equipments, vessels, pumps, vapourisers, condensers, filters, eductors, heat exchangers, drivers, screens, framing structures, gates, instrumentation and control systems, activated carbons, ion exchange resins, resin traps, additive injection systems and auxiliaries (skidded or otherwise) 6. All types of Effluent Solids/Liquids/Gaseous Processing, Handling, Control, Abatement and Disposal Systems, including plate interceptors, dissolved air floatation devices, skimmers, hydrocyclones, clarifie
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
gas/oil kids, and including LPG vaporizers, steam superheaters, heat recovery steam generators, electric heaters, FCC flue gas coolers, steam reformers, CO boilers, circulating fluidised bed boiler, auxiliary boilers, process interheaters, thermal reactors, thermal incinerators, coke feeders, limestone feeders, ESP/baghouse filters, alongwith associated instrumentation & control systems, including burner lighting, flame detection and burner management systems. 9. All types of Compressors, including axial, centrifugal, diaphragm, reciprocating, rotary screw and sliding vane type compressors, for gas, air, hydrocarbon and all special services including FCC Power Recovery Trains (PRT), LPG vapour return blowers, with drivers of motor or steam turbine or expansion turbine or engine or gas turbine or hydraulic turbine types, speed governor systems, seal/lube/control oil systems (skidded or otherwise), gear assembly, bearings, barring gears, clutch, couplings, intercoolers, after cooler
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
rol systems, anti vibration systems. 12. All types of Agitators and Mixers, including static, jet, dilution types, motor drivers, aeration systems, with instrumentation and control systems. 13. All types of Filters, Screens and Strainers, including backwash, bucket, carbon, cartridge, duplex, pressure / mechanical, rotary, drum, sand, sock/bag, vaccum types, and special FCC net bottoms catalyst filters, screens, strainers, demisters and sea water clarifiers, with instrumentation and control systems. 14. All types of Vaccum Producing Equipments, including ejectors, educators, venturies, with instrumentation and control systems. 15. All types of Materials Separation systems, including cyclones, centrifuges, coalescers, dust collectors, electrostatic precipitators, oily water separators, flocculators, and specialized systems of Crude Oil Desalters, Reactor Cyclones and Regenerator Cyclones for FCC, third Stage Separators and Fourth Stage Cyclone Separators for FCC, with vessel internals,
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
utral resistors, heat tracing systems including insulation, microprocessor based process controllers, local control stations, motor control centres, power control centres, HT/LT motors, shock eliminators, HT/LT switch gears, transducers, HT/LT transformers, UPS and variable speed drivers over current protection devices, instrumentation and control systems including load distribution and management systems and auxiliaries, (skidded or otherwise). 18. All types of Materials Handling Equipments including belt or pneumatic conveyors, ducts, hoists, bucket or jib cranes, (with or without gangways), pipe and hoses, funnels, hoppers, disengaging lock hoppers, catalyst addition pots, valves and sampler devices, bagging, weighing and bag stitching systems, weigh bridges, buoy systems for crude oil receipt, pipeline and manifolds with valves, fenders, mooring aids, laser docking systems, product tanker loading facilities, with associated equipments, instrumentation and control systems, and auxil
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
se). 22. All types of Pumps, including API or non-API, centrifugal , diaphragm, in-line, jockey, vertical, booster, barrel, gear, Sundyne, screw, ram, reciprocating or submersible types, single stage or multistage types, for petroleum crude or intermediate products or petroleum products and byproducts, water including sea water and boiler feed water, chemicals, slops or sludge services, liquid booster for LPG (cryogenic), with motor or steam turbine or hydraulic turbine or diesel engine drivers, and instrumentation and control systems, auxiliaries, including seals flushes, gear boxes, water cooling harnesses and lube oil consoles. 23. All types of Tanks and Storages, including plate materials, flanges, fasteners, nozzles, fittings and other components for assembly/construction/erection at site, and instrumentations, including relief, breather, and rim vent values, nitrogen blanketing systems, roof drain pipings, rim seals, flame arrestors and automatic tank gauging systems, for oil, hy
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
heads, internals, grids, screens, demisters, coalescers, boots, distributors, packing and their supports/fasteners and accessories, for storage, separation, reaction, mixing, decoking, degassing, flashing, draining, blow down, desuperheating, drying, sealing, receiving, surge and interface controlling services, and their appurtenances, instrumentation, insulation and auxiliaries. 26. All types of Reactors, either supplied separately or together, comprising of shells, heads, catalysts, support materials, grids, screens, demisters, coalescers, distributors, packings and supports/fasteners and accessories, for carrying out cracking (FCC Reactor and Spent Catalyst Stripper), coking (Coke Drums), visbreaking, hydrotreating, hydro desulphurization, hydrocracking, catalytic reforming (Platformer), shift, sulphur (Claus), adsorption (CBA, PSA), oxidizing, treating (Merox), regenerating (FCC Regenerator/Combustor), desulphurising reactions, spray and mixing nozzles and their appurtenances, ins
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
re, flow speed, temperature and weight, and monitoring systems for ambient air, fugitive emissions, pipelines, speed, stack emissions and vibration. 29. All types of Control Equipments, including ball/butterfly/gate/globe/needle/plug/bellow sealed type control valves, shutdown valves, self actuating, solenoid, on/off, fast acting quarter turn, pressure regulating, breather and pressure/vaccum relief valves, pilot operated safety valves, and valves for specialised services, such as catalyst addition systems and lock hopper control systems. 30. All types of Control Hardware and Software Systems, including Distributed Control Systems (DCS), Emergency Shutdown Systems (ESD), Programmable Logic Controllers (PLC), Security and Access Systems, Terminal Automation Systems, Advanced Process Control (APC) Systems with Real Time Optimizer (RTO), Supervisory Control and Date Acquisition (SCADA) Systems, and Refinery Information Management System (RIMS) with operator panels, computers, date loggers
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
e fabrication accessories, spargers, nozzles, plugs, packing glands, rings, flanges, gaskets, supports, pads, manifolds, siphons, shock absorbers, struts, fasteners, mitre/long radius/short radius bends, sockolets, weldolets, spray nozzles, graylock fittings, swagelock/compression fittings, insulating kits, special steam traps, liquid float traps, bellows, flexible hoses, couplings, vent silencers, and speciality items like Teflon sliders, standpipe expansion joints, spring supports/hangers, scraper tees, pipeline and manifolds with valves, cleaning/scraping/monitoring pigs, pig launcher, pig receiver and pig detection system, cathodic protection system with sacrificial anodes and CP monitoring system, with instrumentation and auxiliaries. 34. All types of valves, including ball, butterfly, check, diaphragm, gate, double disc or knife gate,, globe bellow sealed globe, jacketed, plug, through conduit type valves, with manual/gear/motor/hydraulic operations, for oil, water, steam, hydroc
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
ferrous or non-ferrous pre-fabricated/semi-fabricated, Plant Structures, including pipe racks, supporting frames, trestles, pipe bridges with pipes pre-installed and pre-insulated. 38. All types of Analyzers, either on-line or off line, for measurement of H2S, Oxygen, NOX, SOX, CO2, CO, hydrocarbon, dew point, density, conductivity, pH, combustible gases, oil in water, vapour pressure, silica, sodium, distillation, flash point, moisture, viscosity and smoke point, and analyzer sampling systems/cubicles, analyzer houses with sample conditioning systems, sample probes/sensors, tubings, HAVC systems, calibration gases cylinders and Drager tubes. 39. All types of Laboratory Equipments, including sampling, quality control and analytical equipments for testing and measurement of various petroleum crude/products/by products quality parameters, and including sample collection equipments, gas/ion chromatograph, CFR engines for octane and cetana number, pulse NMR, spectrophotometers of differen
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
annel communication systems, radio telemetry systems, with remote telemetry units, portable units and PC based master telemetry units and antenna systems. 42. Initial charge of all types of catalysts, deslocants, zeolites, activated carbons, clay molecular sleves, used in refining and processing of petroleum crude, petroleum products and by-products. 43. Software Support Systems, including training simulation systems, electronic documentation systems, CAD stations, date tapes, operation/maintenance/safety manuals, scanners, plotters, printers, software including licenses, specifications, drawings, technical literature, and their hardware and software. 44. Special Maintenance Systems, including hydro-jetting tools, pneumatic torque wrenches, EOT/mobile cranes, hoists, grinders, high pressure cleaning systems, induction bending machines, auto welding machines, various welding equipments like girth welding, vertical flux cord, bottom saw, four-side edge preparation, angle rolls, rolling a
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
self propelled piling rig with accessories 11) Hydraulically operated rough terrain self propelled 100 tons crane with telescopic boom 12) Hydraulically operated self propelled soil boring equipment with casing pipes for deep earth anchor 13) Automatic asphalt extraction equipment 14) Fully automatic, hydraulically operated, pre-cast segment moulds 15) Hydraulic gantry crane of 100 tonnes capacity for launching truss 16) Tunnel Excavation & Lining Equipment List 15 (See S.No. 412 of the Table) 1) Hot mix plant batch type with electronic controls and bag type filter arrangements more than 120 T/hour capacity 2) Electronic paver finisher (with sensor device) for laying bituminous pavement 7m size and above 3) Kerb laying machine 4) Mobile concrete pump placer of 90/120 cu m/hr capacity 5) Skid steer loaders 6) Drilling jumbos, Loaders, Excavators, Shortcrete machine and 3 stage crushers List 16 (See S. No. 421 of the Table) 1) Telephonic or telegraphic apparatus of the following desc
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
te:- Goods specified against item 1(a) is to be imported only by Cellular Mobile Telephone Service Licencees and Universal Access Service Providers List 17 (See S. No. 424 of the Table) 1) Paging control terminal 2) Transmitter controller 3) Paging transmitter 4) Link transmitter/link repeater, monitor receiver 5) Link receiver 6) N+1 Arbitrators for the above, hot standby panel 7) Combiners 8) Automatic monitoring system 9) Network management & control system 10) Integrated ACD/OAP system 11) Isolators 12) Cavity filters 13) Multicouplers 14) Directional power sensors 15) Communication analysers 16) Radio communication test set up, spectrum analyser, field strength meter 17) POCSAG or FLEX encoders 18) Global positioning system 19) Simul cast controller 20) Automatic call distribution equipment/system List 18 (See S. No 425 of Table) 1) Controller (Dispatch) of the following description namely:- (a) Network Controller, Master Controller (b) Line Conditioner for controller (c) Comp
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
in site RDM (e) Receiver Voter Module (f) Remote Multiplexer Module (g) Voter Diagnostic Module (h) RDM Test Cable (i) Satellite Power Supply (j) Central demix Module (k) Voter Shell Assembly 7) Field Programming kit- (a) Radio Interface Box (RIB) (b) RIB to Repeater Cable 8) Computer for billing and customer services 9) Short Message Service Hardware 10) Automatic Call Distribution System 11) Transcoders 12) Test equipment 13) Mobile Switching Office (MSO) List 19 (See S. No. 426 of the Table) (1) Micromanipulators (2) Molecular beam expitaxy system (MBE system) (3) Chemical vapour deposition (CVD) system – Low pressure CVD (LP CVD) – Metal organic CVD (MO CVD) (4) High pressure oxidation systems (5) Lithography systems (6) Direct step on wafers / steppers (7) X-ray lithography systems (8) E-Beam mask making system (9) E-Beam direct write system (10) Mask aligners (11) Mask inspection systems (comparators) (12) Wafer scriber or Wafer slicer or Wafer sawing machine or Wafer fractures o
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
gen, Oxygen and Argon gases (30) Hydrogen, Oxygen and Nitrogen gas generators and accessories for producing high purity process gases for semiconductor wafer/device manufacture (31) Automatic lead frame loaders for semiconductor devices (32) Mercury probing apparatus and accessories for measuring oxide purity and carrier concentration of semiconductor wafers (33) Parts of mercury probing apparatus (34) Fume scrubbers for toxic process gases used in semiconductor industry (35) Apparatus for profiling and measurement of the surface including topography of semiconductor wafers and /or any layers deposited on it 36) Mass Flow Controllers (MFC) and Source Vaporiser for various process gases used in semiconductor wafer processing 37) RF Generator for Epitaxial Reactors heating 38) Parts of RF Generator 39) Equipment used for quality control namely Burn-in Systems, moisture monitors and parts thereof 40) Tools for Moulding, Cutting, Trimming operations used in the semiconductors manufacture 4
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
out the defects 54) Trace Moisture Analyzer / Dew point analyser for measuring moisture contents in PPMS 55) UV light intensity measurement apparatus in semiconductor manufacture 56) Critical Dimension measurement system for Mask making List 20 (See S. No. 427 of the Table) 1. Ferrite parts including memory cores and ferrite magnets 2. Switches with contact rating less than 5 amperes at voltage not exceeding 250 Volts AC or DC 3. 99[Connectors other than those of cellular mobile phones] 4. Microphones /Microphone cartridges 5. Relays of contact rating upto 7 amperes 6. Microwave passive parts 7. (i) Saw filters (ii) Ceramic filter/trap (iii) Delay lines (iv) CRT socket (v) Spark gap 8. Fibre optics and other optoelectronic parts and devices namely, Couplers, Attenuators, 99[Connectors other than those of cellular mobile phones], Splicers, Multiplexers and Demultiplexers 9. Passive optical parts, namely, Microlens and splitters, Micropositioners, Optical filters and gratings and Phase p
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
ro-array equipment including scanners, micro-fluidics station, arrayers, bio-analysers, micro-array chips and bio-chips 20) Proteomic Analysers and proteomic lab Systems 21) Flow Cytometer/FACs 22) Protein Purification System 23) Gel Documentation System 24) Enzyme linked immuno SPOT (Elispot) Reader System List 22 (See S. No. 430 of the Table) 1) UV/Visible spectrophotometer, either with PDA and/or kinetics measurement and low bandwidth 2) Preparative chromatographic system 3) Chiral columns and other HPLC columns for specific application 4) X-ray diffraction equipment 5) Capillary electrophoresis 6) Robotic sample processing system 7) Particle size analysers, laser diffraction, lights scattering and photocorrelation spectroscopy types 8) Atomic absorption Spectrophotometer 9) Tensiometer 10) Moisture balance 11) Elemental analyser 12) High Precision Auto titrator 13) TOC Analyser 14) Ion Chromatograph 15) Spectrofluorimeter.Luminescence meter 16) Parenteral particle counting system 1
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
tein electrophoresis apparatus (1D/2D), 48) Nucleic acid sequencer 49) Imaging densitometer 50) Fast-protein Liquid Chromatography 51) U.V. Crosslinker 52) Probe Sonicator 53) Sintillation counters (Y and B) 54) CO2 incubator 55) Incubator shakedr for bacterial culture 56) Polymerase chain reaction machine 57) Cell harvestor 58) Speed Vac 59) Hybridizing oven 60) Protein sequencer 61) Confocal microscope 62) Capillary electrophoresis 63) Electroporator 64) Scanning electron microscope 65) Amino acid analyser 66) Peptide synthesizer 67) Phosphor imager 68) Fluorescence activated cell sorter 69) ELISA reader 70) Fermenter 71) Spray drier 72) Protein purification set up 73) Stimulator 74) Two channel organ bath (with two channel recorder accessories) (a) Isotonic transducer (b) Isometric transducer (c) Pressure transducer 75) Plethymsometer 76) Blood pressure monitor 77) Blood pressure manual scanner 78) Auto analyser 79) Biofuge 80) Passive avoidance apparatus with controller 81) Auto st
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
Auto lgnition test apparatus. 10) Auto radiography equipment 11) Auto titrator 12) Automatic cover slipper 13) Automatic slide stainer 14) Automatic tissue processor 15) Ball tube distillation apparatus 16) Basic Glove Boxes 17) Basic Orbital and Horizontal Shakers 18) Biolistic (Gene gun) 19) Biological Oxidiser 20) Biopsy punches 21) Blood Cell Counter 22) Blood flow Meter 23) Blood sampling equipments 24) Body composition analysis equipment 25) Bottom Top Dispenser 26) Brookfield viscometer 27) Butane fuel microtorches 28) Cardiac monitors 29) Cell lines 30) Centrifuges and Ultra Centrufuge 31) Chilling incubators 32) Coating Apparatus 33) Crusher (tissue) 34) Crystal/freezing microtone and Ultramicrotone 35) Densitometer 36) Differential Scanning Calorimeter 37) Digital Boiling point/melting point/Freezing point apparatus 38) Digital Cameras 39) Digital pH meter 40) Digital Stroboscope 41) Digital Temperature 42) Controllers 43) Digital theremometer for recording body temperature o
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
eed refrigerated research centrifuge 75) High throughput organic synthesizer, High throughput biological screening equipment 76) Hybridizing overn 77) Image Analyzer and Imaging Densitometer 78) Implantable Plant 79) Incubators 80) Inductive coupling plasma equipment 81) Infrared temperature sectos 82) Inhalation chambers with accessories. 83) Inverted microscope with flurosence microscopy with photographic attachment 84) Laser particle size analyzer,Particle shape analyzer, Surface area analyzer 85) Liquid scintillation counter 86) Low Temperature Circulation Bath 87) Micro and Micro soxlet extractors 88) Microscope and Microtome blades disposable 89) Reation colorimeter 90) Otoscopes 91) Peristaltic pumps 92) Phototachometer 93) Polorimeter 94) Porometer and Porosity analyzer 95) Potentiometer 96) Precision vacuum contractor 97) Probe sonicator 98) Protein purification machine 99) Radiodetector, radiommunoassy equipment, Gamma counter for hormonal assay 100) Refractometer and Rotary
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
e 13) Industrial Sewing machine 14) Single needle bed drop feed lockstitch machine 15) Single needle lockstitch flat bed machine 16) Single needle flat bed drop feed lockstitch machine with speed more than 3500 stitches per minute 17) High speed twin needle feed lockstitch machine 18) High speed two needle lockstitch machine 19) Computerised multineedle lockstitch/chainstitch machine 20) Single needle lockstitch machine with built in trimmer 21) Blind stitch machine of various models 22) Single needle drop feed chainstitch machine 23) Two needle chainstitch or lockstitch machine 24) Chainstitch overedging machine 25) Two or three needle chainstitch machine 26) Two thread chainstitch for high speed seaming and banding operation with gear driven pulled feed/compount feed of speed 3500 stitches per minute and above. 27) Safety stitch machine 28) Power driven flat bed knitting machine 29) Computerised flat bed knitting machine 30) Power operated flat lock/overlock machine 31) Linking machi
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
hine 55) Pocket creasing machine 56) Embroidery machine with 10 heads and above 57) Computerised embroidery machine 58) Printing and curing machine 59) Quilting machine 60) Snap fasterns fixing machine and/or siwa thereof 61) Thread cleaning machine 62) Steam Press 63) Portable boiler for steam press 64) Steam Cabinet 65) Vaccum table 66) Fusing press 67) Dry to Dry cleaning machine 68) Stain/spot removing machine/gun 69) Automatic 25-needle shirring/smoking machine 70) Shirt folding machine 71) Form finisher 72) Collar contour trimmer 73) Spreading machine 74) Shoulder pad attaching machine 75) Shrinkage controlling machines for knitting fabrics 76) Loopdrivers for tubular knitted fabrics 77) Mercerising machines for tubular knitted fabrics 78) Singeing machines for tubular fabrics 79) Pile cutting machines for knitted fabrics 80) Rotating edging machine for fabric rolls 81) Conveyors for garments 82) Garment Calendering machine 83) Tie making machines 84) Labelling machines 85) Layin
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
hine 105) Drawing machine for Flax 106) Roving machine for Flax 107) Wet ring frame for Flax 108) Auto winding machine for Flax 109) Continuous spinning machines for Viscose Filament Yarn. 110) Digital electronic frequency inverters for spinning machines including control boards 111) Finishing oil metering pumps with relevant feed system 112) Metering gear pumps for Viscose 113) Portable systems for injection of pigments for viscose dope complete with stirred vessel, metering pumps, instruments and control panel 114) Precious metal spinnerettes including distribution plates (pre- spinnerette) 115) Spin bath degassinag plant by flash evaporation 116) Spin bath backwash filtration system with candle filters 117) Continuous dissolving and homogenisisng system for viscose preparation 118) Contidisk filters for viscose 119) Spinbath heat exchanger in graphite List 25 (See S.No. 432 of the Table) 1) Effluent treatment unit with biopaq reactor, activate sludge process, activated carbon, ultra
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
conveyer drying machine (i) Drying range (ii) Float dryer (iii) Loop dryer (iv) Drum dryer (v) Jet dryer (vi) Rapid dryer 17) Compacting Machine 18) Computer controlled HTHP yarn dyeing machine 19) Soft package winders (dye package winders) 20) Automatic dye weighing and dispensing system 21) Open width Tubular inspection machine 22) Fastness testing equipment 23) Shrinkage testing equipment 24) Indigo dyeing range with/without sizing plant 25) Computer colour matching equipment 26) High speed computer control padding mangle 27) Powder dot coating machine 28) Laser engraver or inkjet engraver 29) Pre-shrinking range for flat and Knitted goods 30) Knit-tubular mercerising or bleaching-cum-mercerising machine 31) Auto flame controlled, width controlled singeing machine for flat and Knitted fabrics 32) Milling and scouring machine 33) Shearing and Polishing machine 34) Kier Decatising/Decatising machine 35) Combined Contripress / Decatising machine 36) Auto fabric detwister 37) Rotary/Fla
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
tching computer List 27 (See S.No.439 of the Table) 1) Air blast dust removing machine 2) All types of staking machines except slocum (slow combing process) 3) Automatic Drying machine 4) Automatic Lacing machine 5) Automatic Leather Perforating and/or Punching machine 6) Automatic Lock-Stitching Cylinder Bed Bartacker 7) Automatic machine to control, to slant and to glue leather straps 8) Automatic Milling machine 9) Automatic Milling-Boring Machine 10) Automatic or semi-automatic hydraulic press (750 tonnes or more) 11) Automatic Padding machine 12) Automatic Spraying machine 13) Automatic Tacks – Reinforce machine 14) Automatic Work Unit for assembling the complete Insole 15) Back Part Moulding machine 16) Band-saw with or without Flier 17) Bandknife Splitting machine 18) Belt Punching and cutting machine 19) Bobbin machine with counter 20) Boot leg ironing machine 21) Bottom Leather Grain Crack Tester 22) Bottom roughing and/or scouring machine 23) Box Stamping machine 24) Buckle S
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
/hydraulic 52) Dyeing machine 53) Edge buffing machine 54) Edge Inking machine 55) Edge Pre-Trimming machine 56) Edge Setting machine 57) Edge Trimming machine 58) Elastic inserting machine on variety of garments 59) Electrical machine for cutting and slanting straps 60) Electro pneumatic weaving machine for leather 61) Electronic skin assessor 62) Embossing Plates for Press for leather printing 63) Engraved rollers for Press for leather printing 64) Evening and Roughing machine for Soles and Insolses 65) Fibre Board Flexing machine 66) Fine Turn machines for Lasts 67) Finish Sheet Resistance Tester 68) Finishing Machine for Lasts 69) Fixed Head/Travailing Head Clicking Cutting machine 70) Flat Bed Double Needle Sewing machine 71) Flat Bed Single Needle Industrial Sewing machine with or without trimer 72) Folding machine for brief cases and other leather products 73) Folding machine for sides for Brief Case 74) Forepart conditioning machine 75) Frame Fixing/Frame Folding machine 76) Fu
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
05) Hydraulic Setting machine 106) Hydraulic Shaving machine 107) Hydraulic Shearing machine 108) Hydraulic Splitting machine 109) Hydraulic Sulphide applicator 110) Injection Moulding of PVC/TPR/EVA Soles, Inserts and Half Soles 111) Injection Moulding press to produce Plastic shoe Lasts 112) Insole Attaching machine 113) Insole Backpart Stiffener Tester 114) Insole Bevelling machine 115) Insole Covering machine 116) Insole moulding machine 117) Ironing and Conditioning machine including chill setter machine 118) Kamborian Lasting machine 119) Knife Grinding machine 120) Knife making equipment for cold steel and forged steel 121) Label stitching machine 122) Last Turning machine 123) Lastometer 124) Leather buffing machine 125) Leather cover cutting machine for Heels 126) Leather Polishing machine 127) Leather rolling machine 128) Lining roughing machine 129) Lining Trimming machine 130) Loop closing machine 131) Loose / Nailing machine 132) Manual loop cutter 133) Mckay Stitching mac
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
machine 157) Polyshanking machine 158) Polyurethane / PVC / TPR and EVA Sole, Insole, Heel, Heel Tip Injection Moulding machine (single or multiple station) 159) Fore part lasting machine 160) Post Bed Double Needle Sewing machine 161) Post Bed Single Needle Sewing machine 162) Post Bed Single Needle under Edge Trimming 163) Pounding or beating or ironing machine or combination of such machines 164) Pre-lasting conditioner 165) Preparing and polishing machine 166) Pulling Over and Cement Lasting machine 167) Pulling Over Machine 168) Punches for model room 169) Punches of all varieties 170) Punching and / or eyeletting machine 171) PVC/PU/EVA direct injection soling machine (DIP construction) 172) Quilting machine 173) Raised Cord Sewing machine 174) Reactivating Plant for Shoe and Soles 175) Recessing and Roughing Soles machine 176) Recessing Welt machine 177) Rotary Collection Unit 178) Rotary Pigment Coating machine 179) Rotary Printing machine 180) Rough Turn machine for lasts 181)
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
hine/ Cutting Press 208) Spray Booths 209) Stamping machine for Upper / Lining / Socks 210) Steam Toe Press 211) Stich Marking machine 212) Strap / Strip Cutting machine 213) Strap Folding machine 214) Stretching and drying machine with or without conveyor and toggles 215) String Lasting machine 216) Strobel type stitching machine 217) Studs Attaching machine 218) Suit Case Stitching machine 219) Tack heel seat lasting machine 220) Tack Lasting machine 221) Tack Side lasting machine 222) Tanning and colouring drums 223) Taping and/or seam rubbing machine 224) Testing Equipments, namely :- Flexometer / Upper material flexing machine, Tensometer / Lastometer, Permeometer / Upper leather water proofness tester, Penetrometer / Bottom Leather water enetration machine, Finish rub fastness tester, Upper leather abrasion resistance machine, Dome lasticity apparatus, Finish fleat resistance tester, Adhesion of finish tester, Leather shrinkage emperature determination apparatus, Wrinklometer, Bo
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
236) Upper Embossing machine 237) Upper Folding machine 238) Upper Forming machine 239) Upper Perforating machine 240) Upper Reinforcing machine 241) Upper Seam Rubbing / Beating machine 242) Vaccum Drying machine 243) Vaccum forming machine for last with vaccum pump 244) Vice for holding pattern 245) Vision Lasting System for Toe Lasting machine 246) Vulcanizing Press 247) Welt (Rand) Attaching machine 248) Aquamix for use in Tanning industry 249) Prodomix for use in Tanning industry 250) Microtan / Computan for use in Tanning industry 251) Pneumatic press for engraving and marking 252) Pneumatic staple gun for stapling insoles, heels and uppers 253) Stapling machine for bows to uppers on leather shoes 254) Lighting assessment cabinet (for checking colour under different light conditions) 255) CAD/CAM equipment for shoe desgining and pattern engineering including software 256) Bias tape cutting machine 257) Spiking machine 258) Airhood with grinder 259) Sock liner press 260) Box foldi
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
for belts and leather goods 282) Embossing machines, all types 283) Forepart lasting machine 284) High Frequency embossing machines for uppers, Soles, Socks 285) Hot Glazing machine for belts and leather goods with or without polishing 286) Laminating machine of straps for belts 287) Laser designing and cutting machines 288) Rivetting machines with tools for leather industry 289) Snap Fasteners fixing machines 290) Stacking machine for belts 291) Top Line Forming Machine 292) Ultrasonic Designs embossing and transfer application machine List 28 (See S.No.475 of the Table) 1) Scramblers 2) Descramblers 3) Encoders 4) Decoders 5) Jammers 6) Network firewalls 7) Network sniffers, scanners and monitoring systems 8) Probes for data monitoring 9) SMS and MMS monitoring systems List 29 (See S. No.478 of the Table) A. Wireless Apparatus and accessories- (1) HF, VHF, or UHF trans-receiver (combination of transmitter and receiver) meant for amateur frequencies with accessories in assembled or ki
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
(See S. No. 578 of the Table) A. (1) Braille writers and braille writing instruments (2) Hand writing equipment Braille Frames, Slates, Writing Guides, Script Writing Guides, Styli, Braille Erasers (3) Canes, Electronic aids like the Sonic Guide (4) Optical, Environmental Sensors (5) Arithmetic aids like the Taylor Frame (arithmetic and algebra types), Cubarythm, Speaking or Braille calculator (6) Geometrical aids like combined Graph and Mathematical Demonstration Board, Braille Protractors, Scales, Compasses and Spar Wheels (7) Electronic measuring equipment, such as calipers, micrometers, comparators, gauges, gauge blocks Levels, Rules, Rulers and Yardsticks (8) Drafting, Drawing aids, tactile displays (9) Specially adapted clocks and watches B. (1) Orthopaedic appliances falling under heading No.90.21 of the First Schedule (2) Wheel chairs falling under heading No. 87.13 of the First Schedule C. Artificial electronic larynx and spares thereof D. Artificial electronic ear (Cochlear
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
cushions to prevent bed sores, stair lift, urine collection bags (9) Instruments and implants for severely physically handicapped patients and joints replacement and spinal instruments and implants including bone cement List 31 (See S. No. 598 of the Table) 1) Parbati-II, Himachal Pradesh – 4×200=800 MW (NHPC) 2) Teesta- V, Sikkim – 3×170=510 MW (NHPC) 3) Sipat-II, Chhattisgarh – 2×500=1000 MW (NTPC) 4) Vindhyachal-III, Madhya Pradesh – 2×500=1000 MW (NTPC) 5) Talcher-II, Orissa – 4×500=2000 MW (NTPC) 6) Rihand-II, Uttar Pradesh – 2×500=1000 MW (NTPC) 7) Sipat-I, Chhattisgarh – 3×660=1980 MW (NTPC) 8) Kahalgaon-II Phase-I & II Bihar – 3×500=1500 MW (NTPC) 9) Barh, Bihar – 3×660=1980 MW (NTPC) 10) Koldam, Himachal Pradesh – 4×200=800 MW (NTPC) 11) Tuticorin, Tamil Nadu- 2×500=1000 MW (NLC) 12) Parbati-III, Himachal Pradesh – 4×130=520 MW (NHPC) 13) Jhanor Gandhar CCPP-II, Gujarat – 2×650=1300 MW (NTPC) 14) Kawas CCPP-II, Gujarat – 2×650=1300 MW (NTPC) 15) RGPPL, Maharashtra – 2150
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
60=1320 MW (NTPC) 33) Nabinagar STPP, JV with Bihar, Bihar-3×660=1980 MW (NTPC) 34) Mouda STPP-II, Maharashtra- 2×660= 1320 MW (NTPC) 35) Raghunathpur TPS (Ph-II), West Bengal- 2×660=1320 MW (DVC) 36) North Karanpura STPP, Jharkhand- 3×660=1980 MW (NTPC) 37) Kudgi STPP stage-I, Karnataka- 3×800=2400 MW (NTPC) 38) Darlipalli STPP, Stage-I Orissa- 2×800=1600 MW (NTPC) 39) Barethi STPP, Madhya Pradesh- 6×660=3960 MW (NTPC) 40) Lara STPP, Chhattisgarh -2×800=1600 MW (NTPC) 41) Gajmara STPP Stage-I – 2×800= 1600MW (NTPC) 42) Rajiv Gandhi CCPP Stage- II Phase-I, Kerala- 3×350 =1050 MW (NTPC) 43) Gidderbha STPP, Punjab – 4×660= 2640 MW (NTPC) 44) Khargone Super TPP, M.P. – 2×660= 1320 MW (NTPC) 45) Gadarwara Super TPP, M.P. – 2×660= 1320 MW 2×800= 1600 MW (NTPC) 46) Katwa Super TPP, West Bengal – 2×800= 1600 MW 2×660= 1320 MW (NTPC) 47) Bilhapur STPP, Uttar Pradesh -2×660= 1320 MW (NTPC) 48) Talcher STPP [TPP] Stage-III, Orissa – 2×660=1320 MW (NTPC) 49) Khedar (Hissar), Haryana – 1000 (+200)
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
Sasan, Madhya Pradesh- 6×660= 3960 MW (Sasan Power Ltd.) 65) Tilaiya UMPP, Jharkhand- 5×800= 4000 MW (Jharkhand Integrated Power Ltd.) 66) Orissa UMPP, Orissa- 5×800= 4000 MW 67) Chhattisgarh UMPP, Chhattisgarh- 5×800= 4000 MW 68) Cheyyur UMPP,- 5×800= 4000MW 69) Raigarh TPP, Chhattisgarh- 4×250= 1000 MW (M/s. Jindal Power Ltd.) 70) Akhakhol GBPP, Gujarat- 3×382.5= 1147.5 MW (M/s. Jindal Power Ltd.) 71) Udupi (Nagarjuna) Power Project, Karnataka- 2×600= 1200 MW (M/s. Udupi (Nagarjuna) Power Corp. Ltd.) 72) IPP project Haryana- 2×660= 1320 MW (M/s. Jhajjar Power Ltd.) 73) 726 MW CCGT being developed by ONGC-Tripura Power Company Ltd. (OTPC) at Palatana, Tripura-(2×250)(2×113.3)= 726 MW 74) Salaya TPP, Gujarat- 2×600= 1200 MW (M/s. Essar Power Gujarat Ltd.) 75) Tiroda TPP, Maharashtra-5×660=3300 MW (M/s. Adani Power Maharashtra Ltd.) 76) Kawai TPP, Rajashtan – 2×660=1320 MW (M/s. Adani Power Rajasthan Ltd.) 77) Teesta-VI, Sikkim – 4×125= 500 MW (M/s. Lanco) 78) Teesta-III Sikkim- 6×200=
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
tion Ltd. (U-1&6) Janjgir Champa, Chhattisgarh-2×600 MW 90) Thermal Powertech Corporation Ltd. Pynampuram Andhra Pradesh- 2×660 MW 91) KVK Neelanchal Power Pvt. Ltd Cuttak, Orissa-3×350 MW 92) East-Coast Energy Pvt. Ltd Srikakulam, Andhra Pradesh.-2×660 MW 93) Monnet Power Corporation Ltd. Malibrahmani, Orissa-2×525 MW 94) Hinduja National Power Corporation Ltd. Vishakhapatnam, Andhra Pradesh-2×520 MW 95) Corporate Power Ltd. Chandwa, Jharkhand-4×270 MW 96) Lanco Power Ltd. (U-3,4) Pathadi, Chhattisgarh-2×660 MW 97) Lalitpur Power Generation Company Ltd. Lalitpur, U.P.-3×660 MW 98) Lanco Vidarbha Thermal Power Ltd. Wardha, Maharashtra-2×660 MW 99) Lanco Babandh Power Ltd. Dhenkanal, Orissa-2×660 MW 100) DB Power Ltd. Vadodarha TPP Janjgir – Champa Chattisgarh-2×660 MW 101) Athena Chhattisgarh Power Ltd. Singhitarai TPS Janjgir-Champa, Chattisgarh- 2×600 MW 102) Essar Power Jharkhand Ltd. Tori, Jharkhand- 2×600 MW 103) MB Power (MP) Ltd. Anuppur, Madhya Pradesh-2×600 MW 104) RKM Pow
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
440 MW, Units -7 and 8 (Rawatbhata) of 1400MWe 5) Prototype Fast Breeder Reactor (Kalpakkam) -500 MW. 6) Kakrapar Atomic Power Project-Units 3 and 4 (Kakrapar) of 1400 MWe. 7) Gorakhpur Haryana Anu Vidyut Pariyojana (GHAVP) Units -1 and 2 (700 MW x2) 8) Kudankulam Nuclear Power Project (KKNPP) Units – 3 and 4 (1000 MW x 2) List 33 (See S. No. 404 of the Table) (1) Land Seismic Survey Equipment and accessories, requisite vehicles including those for carrying the equipment, seismic survey vessels, global positioning system and accessories, and other materials required for seismic work or other types of Geophysical and Geochemical surveys for onshore and offshore activities. (2) All types of drilling rigs, jackup rigs, submersible rigs, semi-submersible rigs, drill ships, drilling barges, shot-hole drilling rigs, mobile rigs, workover rigs consisting of various equipment and other drilling equipment required for drilling operations, snubbing units, hydraulic workover units, self elevating
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
nt. (6) All types of casing pipes, drill pipes, production tubing, pup joints, connections, coupling, kelly, cross overs and swages, Drive Pipes. (7) All types of drilling bits, including nozzles, breakers and related tools. (8) All types of oil field chemicals or coal bed methane chemicals including synthetic products used in petroleum or coal bed methane operations, oil well cement and cement additives, required for drilling, production and transportation of oil or gas. (9) Process, production and well platforms/ installation for oil, gas or CBM and water injection including items forming part of the platforms/ installation and equipment required like process equipment, turbines, pumps, generators, compressors, primemovers, water makers, filters and filtering equipment, telemetery, telecommunication, tele-control and other material required for platforms/ installations. (10) Line pipes for flow lines and trunk pipelines including weight-coating and wrapping. (11) Derrick barges, Mobi
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
(17) Non-directional radio beacons, intrinsically safe walkie-talkies, directional finders, EPIRV, electronic individual security devices including electronic access control system. (18) Specialized antenna system, simplex telex over radio terminals, channel micro wave systems, test and measurement equipment. (19) X-band radar transponders, area surveillance system. (20) Common depth point (CDP) cable, logging cable, connectors, geo-phone strings, perforation equipment and explosives (21) Wellhead and christmas trees, including valves, chokes, heads spools, hangers and actuators, flexible connections like chicksons and high pressure hoses, shut down panels. (22) Cathodic Protection Systems including anodes. (23) Technical drawings, maps, literature, data tapes, Operational and Maintenance Manuals required for petroleum or coal bed methane operations. (24) Sub-assemblies, tools, accessories, stores, spares, materials, supplies, consumables for running, repairing or maintenance of the go
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
n of India (MMTC) (38) The Handicraft and Handlooms Exports Corporation of India Ltd (39) PEC Limited (40) The State Trading Corporation of India Ltd (41) MSTC Ltd] [F.No. 354/119/2017- TRU] (Mohit Tewari) Under Secretary to the Government of India *********************** Notes: 1. Corrected vide corrigendum notification dated 1.7.2017, before it was read as, the duty payable on 2. Corrected vide corrigendum notification dated 3.7.2017, before it was read as: Condition No. 82 3. Corrected vide corrigendum notification dated 3.7.2017, before it was read as: 82 4. Corrected vide corrigendum notification dated 3.7.2017, before it was read as: Condition No. 83 or 84 5. Corrected vide corrigendum notification dated 3.7.2017, before it was read as: shall not exceed 3% 6. Inserted vide Notification no. 65/2017 Customs dated 8.7.2017 w.e.f. 1.7.2017 – For validation and refund option – see Section 101 of Finance Act, 2018 7. Inserted vide Notification no. 65/2017 Customs dated 8.7.2017 w.e.f.
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
bstituted vide Not. 76/2017 – Dated 15-9-2017, before it was read as, "3823 11 90" 19. Substituted vide Not. 76/2017 – Dated 15-9-2017, before it was read as, "3823 11 90" 20. Substituted vide Not. 76/2017 – Dated 15-9-2017, before it was read as, "Recuronium Bromide" 21. Substituted vide Not. 76/2017 – Dated 15-9-2017, before it was read as, "8472 90" 22. Inserted vide Not. 77/2017 – Dated 13-10-2017 23. Substituted vide Notification No. 84 /2017 – Dated 08-11-2017, before it was read as, "Pulses except tur" 24. Inserted vide Notification No. 84 /2017 – Dated 08-11-2017 25. Substituted vide Notification No. 84 /2017 – Dated 08-11-2017, before it was read as, "10%" 26. Inserted Vide Notification No. 85/2017 – Dated 14-11-2017 27. Substituted vide Notification No. 87/2017 – Dated 17-11-2017, before it was read as, "13[15%]" 28. Substituted vide Notification No. 87/2017 – Dated 17-11-2017, before it was read as, "
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
11-2017, before it was read as, "(a) in case of imports for a project for which certificate regarding Mega Power Project status issued by an officer not below the rank of Joint Secretary to the Government of India in the Ministry of Power is provisional, the importer furnishes a security in the form of a Fixed deposit Receipt or Bank Guarantee from any Scheduled Bank for a term of one hundred and twenty-six months in the name of the President of India for an amount equal to the duty of customs payable on such imports but for this exemption, to the Deputy Commissioner of Customs or Assistant Commissioner of Customs, as the case may be, at the time of importation and if the importer fails to furnish the final mega power status certificate with in a period of one hundred and twenty months from the date of importation, the said security shall be appropriated towards duty of customs payable on such imports but for this exemption;" 38. Omitted vide Notification No. 92/2017 – Dated
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
nt brought for testing of (a) Nil Nil 78 44. Inserted vide Notification No.5/2018 Dated 25-01-2018 45. Substituted vide Notification No. 06/2018 – Dated 02-02-2018, before it was read as, "5%" 46. Substituted vide Notification No. 06/2018 – Dated 02-02-2018, before it was read as, 12.5% 47. Substituted vide Notification No. 06/2018 – Dated 02-02-2018, before it was read as, 20% 48. Substituted vide Notification No. 06/2018 – Dated 02-02-2018, before it was read as, 20% 49. Substituted vide Notification No. 06/2018 – Dated 02-02-2018, before it was read as, 20% 50. Omitted vide Notification No. 06/2018 – Dated 02-02-2018, before it was read as, 2009 81 00, 2009 90 00, 51. Omitted vide Notification No. 06/2018 – Dated 02-02-2018, before it was read as, 101. 2009 1100, 2009 1200 or 2009 1900 Orange juice 30% 52. Substituted vide Notification No. 06/2018 – Dated 02-02-2018, before it was read as, 30% 53. Substituted vide Notification No. 06/2018 – Dated 02-02-2018, before it was
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
tem 8458 11 00, 8458 91 00) or Machining Centres (tariff item 8457 10 10, 8457 10 20) 63. Substituted vide Notification No. 06/2018 – Dated 02-02-2018, before it was read as, Linear Motion Guides for use in the manufacture of CNC Lathes (tariff item 8458 11 00, 8458 91 00) or Machining Centres (tariff item 8457 10 10, 8457 10 20) 64. Substituted vide Notification No. 06/2018 – Dated 02-02-2018, before it was read as, CNC Systems for use in the manufacture of CNC Lathes (tariff item 8458 11 00, 845891 00) or Machining Centres (tariff item 8457 10 10, 8457 10 20) 65. Inserted vide Notification No. 06/2018 – Dated 02-02-2018 66. Substituted vide Notification No. 06/2018 – Dated 02-02-2018, before it was read as, 491. 8544 (except 8544 42 91, 8544 42 92, 8544 42 93, 8544 42 99, 85 44 70 10 or 8544 70 90) All goods 7.5% 67. Substituted vide Notification No. 06/2018 – Dated 02-02-2018, before it was read as, 499. 8517 70 or 8529 90 90 Parts of Cellular Phones and Radio Trunking terminals 5%
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
as read as, 10% 73. Inserted vide Notification No. 06/2018 – Dated 02-02-2018 74. Substituted vide Notification No. 06/2018 – Dated 02-02-2018, before it was read as, 10% 75. Inserted vide Notification No. 06/2018 – Dated 02-02-2018 76. Inserted vide Notification No. 06/2018 – Dated 02-02-2018 77. Omitted vide Notification No. 06/2018 – Dated 02-02-2018 39[586A 9405 All goods other than LED lamps 10% ] 78. Inserted vide Notification No. 06/2018 – Dated 02-02-2018 79. Omitted vide Notification No. 24/2018 – Dated 06-02-2018, before it was read as, 84. 1701 All goods 60% 80. Omitted vide Notification No. 24/2018 – Dated 06-02-2018, before it was read as, 85. 1701 Raw Sugar 8[50%] – 4 81. Omitted vide Notification No. 24/2018 – Dated 06-02-2018, before it was read as, 86. 1701 Refined or white sugar 9[50%] – 5 82. Omitted vide Notification No. 24/2018 – Dated 06-02-2018, before it was read as, 87. 1701 Raw sugar if imported by a bulk Consumer 10[50%] – 6 83. Omitted vide Notification No.
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
, a valid contract or agreement with a sugar factory or sugar refinery for refining of such raw sugar and shall furnish a bond to the effect that the said raw sugar shall be used for the said purpose; (ii) the bond shall be discharged by the Deputy Commissioner of Customs or the Assistant Commissioner of Customs, as the case may be, on production of a certificate from the Goods and Services Tax authorities having jurisdiction over such sugar factory within a period of three months from the date of import of such raw sugar that the entire quantity of imported raw sugar has been refined; and (iii) in the event of his failure to comply with the above conditions, the importer shall be liable to pay, in respect of such quantity of the raw sugar as is not proven to have been refined, an amount equal to the difference between the duty leviable on such quantity but for the exemption contained herein. 85. Omitted vide Notification No. 24/2018 – Dated 06-02-2018, before it was read as, 5. If the
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
d Accountant shall have the same meaning as assigned to it in clause (b) of sub-section (1) of section 2 of the Chartered Accountant Act, 1949. 87. Omitted vide Notification No. 24/2018 – Dated 06-02-2018, before it was read as, 7. The rate of duty specified in column (4) shall apply to such quantity of imports for which an importer holds a Tariff Rate Quota Allocation Certificate or license, as the case may be, issued by the Directorate General of Foreign Trade in accordance with the procedure, as may be specified by the Directorate General of Foreign Trade by a Notification or Public Notice, as the case maybe. 88. Substituted vide Notification No. 26/2018 – Dated 12-02-2018, before it was read as, 531. 8711 Motor cycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side cars, and side cars, new, which have not been registered anywhere prior to importation,- (1) as a completely knocked down (CKD) kit containing all the necessary components, parts or sub
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
Dated 01-03-2018, before it was read as, 473. 85 Integrated decoder receiver, also known as set top box 10% 95. Substituted vide Notification No. 31/2018 – Dated 20-03-2018, before it was read as, "0713 20 00" 96. Inserted vide Notification No. 32/2018 – Dated 23-03-2018 97. Omitted vide Notification No. 32/2018 – Dated 23-03-2018, before it was read as, "(i) Open cell (15.6 and above);" 98. Substituted vide Notification No. 40/2018 – Dated 02-04-2018, before it was read as, Digital Still Image Video Cameras 99. Substituted vide Notification No. 40/2018 – Dated 02-04-2018, before it was read as, Connectors 100. Inserted vide Notification No. 44/2018 – Dated 10-04-2018 101. Omitted vide Notification No. 46/2018 – Dated 23-05-2018, before it was read as, 25. 0802 12 00 All goods ₹ 65/- per kg. 102. Substituted vide Notification No. 46/2018-Customs – Dated 23-05-2018, before it was read as, 25[20%] 103. Omitted vide Notification No. 46/2018 – Dated 23-05-2018,
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
e Notification No. 47/2018-Customs – Dated 14-06-2018 before it was read as "36[35%]" 112. Substituted vide Notification No. 47/2018-Customs – Dated 14-06-2018 before it was read as " 48[35%]" 113. Substituted vide Notification No. 47/2018-Customs – Dated 14-06-2018 before it was read as "49[35%]" 114. Inserted vide Notification No. 49/2018 – Customs dated 20-06-2018 w.e.f. 04-08-2018 115. Inserted vide Notification No. 49/2018 – Customs dated 20-06-2018 116. Inserted vide Notification No. 49/2018 – Customs dated 20-06-2018 117. Inserted vide Notification No. 49/2018 – Customs dated 20-06-2018 118. Inserted vide Notification No. 49/2018 – Customs dated 20-06-2018 119. Substituted vide Notification No. 49/2018 – Customs dated 20-06-2018 before it was read as "28 (except 2823 00 10)" 120. Inserted vide Notification No. 49/2018 – Customs dated 20-06-2018 121. Inserted vide Notification No. 49/2018 – Customs dated 20-06-2018 122. Substituted vide Not
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
goods other than seconds and defectives 129. Inserted vide Notification No. 49/2018 – Customs dated 20-06-2018 130. Substituted vide Notification No. 49/2018 – Customs dated 20-06-2018 before it was read as All goods [other than screw (7318 15 00) and SIM socket / Other Mechanical items (Metal) (7326 90 99) for cellular mobile phone] 131. Inserted vide Notification No. 49/2018 – Customs dated 20-06-2018 132. Inserted vide Notification No. 49/2018 – Customs dated 20-06-2018 w.e.f. 04-08-2018 133. Inserted vide Notification No. 52/2018 – Customs dated 14-07-2018 134. Omitted vide Notification No. 52/2018 – Customs dated 14-07-2018 before it was read as "Analog" 135. Inserted vide Notification No. 52/2018 – Customs dated 14-07-2018 136. Omitted vide Notification No. 54/2018-Customs dated 20-07-2018 before it was read as "330. 6310 All goods 5% " 137. Inserted vide Notification No. 56/2018-Customs dated 03-08-2018 w.e.f. 04-08-2018 138. Inserted vide Notification No.57
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =
rds for use in manufacture of lithium-ion batteries other than batteries of mobile handsets including cellular phones falling under tariff item 8507 60 00; (b) Sub-parts for use in manufacture of items mentioned at (a) above. 147. Inserted vide Notification No. 03/2019-Customs dated 29-01-2019 148. Inserted vide Notification No. 03/2019-Customs dated 29-01-2019 149. Substituted vide Notification No. 03/2019-Customs dated 29-01-2019 before it was read as 525. 8702 Electrically operated vehicles whether imported in a Completely Knocked Down (CKD) kit containing all the necessary components, parts or subassemblies, for assembling a complete kit with engine, gearbox and transmission mechanism not in a pre-assembled condition or not. 10% 150 Inserted vide Notification No. 03/2019-Customs dated 29-01-2019 151 Inserted vide Notification No. 03/2019-Customs dated 29-01-2019 152 Substituted vide Notification No. 03/2019-Customs dated 29-01-2019 before it was read as 527. Any Chapter Lithium io
= = = = = = = =
Plain text (Extract) only
For full text:-Visit the Source
= = = = = = = =