VERIFICATION OF DOCUMENTS AND CONVEYANCES
By: – DR.MARIAPPAN GOVINDARAJAN
Goods and Services Tax – GST
Dated:- 11-7-2018<\/p>\n
Rule 138B provides for verification of documents and conveyances. Rule 138 B(1) provides that the Commissioner or an Officer empowered by him in this behalf may authorize the proper officer to intercept any conveyance to verify the e-way bill or the e-way bill number in physical form for all inter-State and intra-State movement of goods.
\nThe Commissioner shall get Radio Frequency Identification Device readers installed at places where the verification of movement of goods is required to be carried out and verification of movement of vehicles shall be done through such device readers where the e-way bill has been mapped with the said device.
\nRFID Device
\nRFID stands for Radio Frequency Identification Device. RFID uses electromagnetic fields to automatically identify and track tags attached to objects. The tags contain electronically stored informatio<\/p>\n
= = = = = = = =<\/p>\n
Plain text (Extract) only<\/strong> = = = = = = = =<\/p>\n o be carried out by any other officer after obtaining necessary approval of the Commissioner or an officer authorized by him in this behalf. = = = = = = = =<\/p>\n Plain text (Extract) only<\/strong> = = = = = = = =<\/p>\n is 125 KHz. LF RFID has short transmission ranges, generally anywhere from a few inches to less than six feet. = = = = = = = =<\/p>\n Plain text (Extract) only<\/strong> = = = = = = = =<\/p>\n ing healthcare, manufacturing, retail, business and home use. = = = = = = = =<\/p>\n Plain text (Extract) only<\/strong> = = = = = = = =<\/p>\n this can be a national security concern or life-or-death matter. = = = = = = = =<\/p>\n Plain text (Extract) only<\/strong> = = = = = = = =<\/p>\n hnology with smart sensors and\/or GPS technology allows sensor data including temperature, movement and location to be wirelessly transmitted. = = = = = = = =<\/p>\n Plain text (Extract) only<\/strong> = = = = = = = =<\/p>\n","protected":false},"excerpt":{"rendered":" VERIFICATION OF DOCUMENTS AND CONVEYANCESBy: – DR.MARIAPPAN GOVINDARAJANGoods and Services Tax – GSTDated:- 11-7-2018 Rule 138B provides for verification of documents and conveyances. Rule 138 B(1) provides that the Commissioner or an Officer empowered by him in this behalf may authorize the proper officer to intercept any conveyance to verify the e-way bill or the … Continue reading “VERIFICATION OF DOCUMENTS AND CONVEYANCES”<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[],"tags":[],"class_list":["post-12562","post","type-post","status-publish","format-standard","hentry"],"_links":{"self":[{"href":"https:\/\/goodsandservicetax.in\/GST\/index.php?rest_route=\/wp\/v2\/posts\/12562","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/goodsandservicetax.in\/GST\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/goodsandservicetax.in\/GST\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/goodsandservicetax.in\/GST\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/goodsandservicetax.in\/GST\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=12562"}],"version-history":[{"count":0,"href":"https:\/\/goodsandservicetax.in\/GST\/index.php?rest_route=\/wp\/v2\/posts\/12562\/revisions"}],"wp:attachment":[{"href":"https:\/\/goodsandservicetax.in\/GST\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=12562"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/goodsandservicetax.in\/GST\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=12562"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/goodsandservicetax.in\/GST\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=12562"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
For full text:-Visit the Source <\/a><\/p>\n
\nRFID system
\nAn RFID system consists of three components-
\n * a scanning antenna and transceiver (often combined into one reader, also known as an interrogator);
\n * transponder, and
\n * the RFID tag.
\nAn RFID tag consists of a microchip, memory and antenna.
\nThe RFID reader is a network-connected device that can be permanently attached or portable. It uses radio frequency waves to transmit signals that activate the tag. Once activated, the tag sends a wave back to the antenna, where it is translated into data.
\nThere are two main types of RFID tags-
\n * active RFID; and
\n * passive RFID.
\nAn active RFID tag has its own power source, often a battery. A passive RFID tag, on the other hand, does not require batteries; rather it receives its power from the reading antenna, whose electromagnetic wave induces a current in the RFID tag's antenna. T<\/p>\n
For full text:-Visit the Source <\/a><\/p>\n
\nHigh Frequency
\nHigh-frequency RFID systems range from 3 MHz to 30 MHz, with the typical HF frequency being 13.56 MHz. The standard range is anywhere from a few inches to several feet.
\nUltra High Frequency
\n UHF RFID systems range from 300 MHz to 960 MHz, with the typical frequency of 433 MHz and can generally be read from 25-plus feet away.
\nMicrowave RFID systems run at 2.45 GHz and can be read from more than 30-plus feet away.
\nThe frequency used will depend on the RFID application, with actual obtained distances sometimes varying considerably from what might be expected. For example, when the U.S. State Department announced it was to issue electronic passports enabled with an RFID chip, it said the chips would only be able to be read from approximately four inches away. However, the State Department was soon confronted with evidence that RFID readers could skim the infor<\/p>\n
For full text:-Visit the Source <\/a><\/p>\n
\nRFID vs. barcodes
\nUsing RFID as an alternative for barcodes is increasing in use. Among its benefits, RFID can identify individual objects, animals or people without direct line of sight, can identify many items often a thousand or more simultaneously, and can scan items anywhere from inches to feet away depending on the type of tag and RFID reader. Read time for RFID tags is typically less than 100 milliseconds.
\nBarcodes, on the other hand, require direct line of sight and closer proximity than an RFID tag. They also take longer to read, generally ½ second or more per tag. Because barcodes represent a product type versus an individual object represented by an RFID tag, additional information cannot be gleaned from them. In addition, barcodes are not read-write, and because they are printed on the outside of the object are limited in terms of reuse thanks to wear and tear. RFID tags are more rugged and better pro<\/p>\n
For full text:-Visit the Source <\/a><\/p>\n
\nBecause RFID tags do not have a lot of compute power, they are unable to accommodate encryption, such as might be used in a challenge-response authentication system. One exception to this, however, is specific to the RFID tags used in passports, basic access control (BAC). Here, the chip has sufficient compute power to decode an encrypted token from the reader, thus proving the validity of the reader. At the reader, in turn, information printed on the passport is machine-scanned and used to derive a key for the passport. There are three pieces of information used the passport number, the birth date of the passport holder and the passport's expiration date along with a checksum digit for each of the three. Researchers have pointed out that this means passports are protected by a password with considerably less entropy than is normally used in e-commerce, and further that the key is static for the life of the passpo<\/p>\n
For full text:-Visit the Source <\/a><\/p>\n
\nInspection and detention of goods
\nRule 138C provides for inspection and verification of goods. Rule 138C(1) provides that a summary report of every inspection of goods in transit shall be recorded online by the proper officer in Part A of Form GST EWB – 03 within twenty four hours of inspection and the final report in Part B of Form GST EWB – 03 shall be recorded within three days of such inspection.
\nRule 138C(2) provides that where the physical verification of goods being transported on any conveyance has been done during transit at one place within the State or in any other States no physical verification of the said conveyance shall be carried out in the Statement, unless a specific information relating to evasion of tax is made available subsequently.
\nForm GST EWB – 3
\nThe form GST EWB – 3 has two parts, as Part A and Part B. The proper <\/p>\n
For full text:-Visit the Source <\/a><\/p>\n